Page 1
FMM1314 INFRARED SAUNA SYSTEM MODELS: LS-1P-3CH13&LS-2P- 5CH13 Welcome...
Page 2
Thank you for purchasing our sauna products, we congratulate you on your new path to better health. We, at Life smart are striving to become the best infrared sauna supplier in the country; our list of consumers increase daily and we believe your success is our success. We attribute this growth and success entirely to our customer satisfaction, the recognized health benefits, and the quality of our workmanship.
Page 3
We congratulate you on your new path to better health! Thousands of users enjoy the benefits of an infrared sauna every day. Now you can enjoy the great benefits of far-infrared heat within the privacy of your own home. Please read this manual carefully and thoroughly before using an Infrared Sauna for the first time.
Page 4
LS-1P-3CH13 LS-2P-5CH13 Packing List for LS-1P-3CH13&LS-2P-5CH13 For any missing parts please contact your local distributor.
Page 5
1. Front Panel 2. Back Panel 3. Side Panel (L) 4.Side Panel (R) 5.Bottom Panel 6. Top Panel 7.Roof Cover 8.Bench Panel 9.Bench Support 10.Backrest 11.AUX Connector 12.LED White Light 13.Screws list 1. Front Panel 2. Back Panel 3. Side Panel (L) 4. Side Panel (R) 5.
Page 6
5. Do not store flammable objects or chemical substances near the sauna. 6. The sauna must be placed indoors and in a dry area. Moisture will cause damage to the interior and exterior of the sauna. Assembly Instructions for LS-1P-3CH13&LS-2P- 5CH13...
Assembly of the sauna requires at least 2 adults to complete. Please read the instructions thoroughly before and during assembly to ensure proper installation of the sauna. <1> LOCATION OF SAUNA When you find a good location for your sauna, please notice the following.
Page 8
2. Make sure that all buckles are properly secured in place on all panels. <5> INSTALLING BENCH AND THE SUPPORTOR pieces Install the support by connecting it with the bottom panel by the provided screws. Put the bench onto the supports and push it all the way in until it can touch the back panel and is securely in place.
Page 9
2. Make sure the cables in the front left corner do not get pinched between the panels. 3. Leading the wires of heaters onto the board through the corresponding hole. <9> THE MAIN POWER CONNECTION ON THE TOP PANEL LS-1P-3CH13...
Page 10
LS-2P-5CH13 1. Connect all the wires for heaters. 2. Connect the control panel wires. 3. Check to be sure that all connections to the control box are secure. 4. Please connect the wire of the AUX connector from the panel to the black box on the roof panel as per the below pictures <10 >PLACE THE ROOF COVER ONTO THE ROOF PANEL Place the roof cover onto the roof panel, connect it to the roof panel...
Page 11
1. Power on Plug the main power cord into the wall outlet. Press the “On/Off” button one time, the control panel is now operable, but the heaters are not on. You can now use the radio and lights. 2. Warming Press “On/Off”...
Need help?
Do you have a question about the LS-1P-3CH13 and is the answer not in the manual?
Questions and answers