Advertisement
4. operation
4.1.
connect the usB lead to the socket on the rear of the lamp. Plug into usB power supply and turn on, the
charging LED (fig.2.) on the lamp will light RED to show that charging has commenced.
4.2.
When the battery has fully charged the LED will turn GREEN.
4.3.
direct the lens away from your eyes before switching on.
4.4.
Toggle the lamp between the end light and side light using the ON/OFF switch, (fig.1). First press = end light on,
second press = side light on full power, third press = side light on low power.
4.5.
the lamp may be suspended by the hooks or attached to any ferrous surface by using the magnets.
4.6.
When the light is hanging from the hook it can be rotated through 360° for more precise positioning.
4.7.
separate the top and bottom sections by pulling apart. When attached to a ferrous surface, using the base magnet, the lamp can
be rotated to shine in any direction.
fig.1
remove the 6 screws on the back of the lamp. remove the back casing and disconnect the wiring from the circuit
board. remove the battery. dispose of according to local government
under the Waste batteries and accumulators regulations 2009, Jack sealey ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
environmental protection
When the product becomes completely unserviceable and requires disposal
dispose according to local regulations.
sole UK Distributor, Sealey Group.
kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
fig.2
hooks
battery removal
guidelines.
Weee regulations
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
lED3602 SERIES| Issue 1 04/04/17
Advertisement
