1. Manuals
  2. Brands
  3. Paradigm Health & Wellness Manuals
  4. Play Sets & Playground Equipment
  5. FitnessReality kids
  6. Owner's manual

Paradigm Health & Wellness FitnessReality kids Owner's Manual

Fitness playground
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FITNESS PLAYGROUND
ITEM NO: 8410
OWNER'S MANUAL
8410.1-103117
CAUTION: This unit is designed to be used safetly by children between the ages of 3 to 8
years old. This product has a maximum weight limit of 80 lbs per station. Glider swing can
hold up to 1 child per seat. Trampoline can hold up to 1 child at a time. Slide can hold up to
1 child at a time. Nest swing can hold 2 children up to a maximum weight of 80 lbs.

Advertisement

Table of Contents
loading

Summary of Contents for Paradigm Health & Wellness FitnessReality kids

  • Page 1 FITNESS PLAYGROUND ITEM NO: 8410 OWNER’S MANUAL 8410.1-103117 CAUTION: This unit is designed to be used safetly by children between the ages of 3 to 8 years old. This product has a maximum weight limit of 80 lbs per station. Glider swing can hold up to 1 child per seat.
  • Page 2 STOP ARRÊT ALTO PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. STOP. Contact customer service if you have any questions regarding assembly or proper operation of the machine. Email us at: Service@paradigmhw.com Or call us at: 1-844-641-7920 Hours: 8:00 am to 5:00 pm (PST) Daily...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE--------------------------------------------------------------------------------------- 3 LABEL PLACEMENT---------------------------------------------------------------------- IMPORTANT SAFETY PRECAUTIONS----------------------------------------------- 5 OVERVIEW DRAWING------------------------------------------------------------------- PARTS NUMBER & ILLUSTRATIONS------------------------------------------------ TOOLS REQUIRED FOR ASSEMBLY------------------------------------------------- 14 ASSEMBLY INSTRUCTIONS------------------------------------------------------------ ASSEMBLY----------------------------------------------------------------------------------- GROUND ANCHOR INSTALLATION-------------------------------------------------- WARRANTY----------------------------------------------------------------------------------- 29 PARTS REQUEST FORM----------------------------------------------------------------...

  • Page 4: Service

    SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods: For The Best Service, please Email: service@paradigmhw.com Response Time: 1-2 Business Days Emailing us with the information above will be the best method to receive a response during peak business hours Website:...

  • Page 5: Label Placement

    LABEL PLACEMENT...

  • Page 6: Important Safety Precautions

    IMPORTANT SAFETY PRECAUTIONS Read all instructions carefully before assembling operating this product. Retain this owner’s manual and keep the original purchase receipt for future reference. Before you assemble the Fitness Playground, find level ground not less than 6 feet from any structure or obstruction to the Fitness Playground.

  • Page 7: Overview Drawing

    OVERVIEW DRAWING...

  • Page 8: Parts Number & Illustrations

    PARTS NUMBERS AND ILLUSTRATIONS Parts used for main frame assembly 1 PC r II 1 PC 1 PC (labled B) (labled A) 2 PCS 1 PC Climbing bar 12 PCS 6 PCS...
  • Page 9 Ladder Leg Supports 2 PCS (1set preassembled on A1) Legs Support 1 PC (Preassembled on A2) (Two sides are labled A & B) Protective Net 1 PC Hardware used for main frame assembly Binder Post & Bolt Set M8*15 Bolt 6 SETS Ø10x52 Sleeve Nut (Preassembled)
  • Page 10 Parts used for glider assembly 2 PCS Glider Vertical Pole 2 PCS Glider Horizontal Pole Foot Rest 2 PCS 2 PCS Glider Seat 1 PC Glider Attachment Glider Vertical Pole Cap 2 SETS (Preassembled on B5) Bracket used for glider assembly Binder Post &...
  • Page 11 Bracket used for glider assembly Binder Post & Bolt Set M6x12 Bolt 2 SETS Ø8x40 Sleeve Nut (Preassembled ) Bolt Set M8 Bolt 1 SET Ø8x30 Sleeve Nut (Preassembled ) Parts used for trapeze assembly Trapeze Tube Hardware used for trapeze assembly M10*30 Sleeve Nut Set 2PCS (Preassembled)
  • Page 12 Parts used for swing seats assembly Swing Ring 2 PCS (Preassembled on the seat) Swing Seat 1 PC Hardware used for swing seats assembly 2 SETS Ø10x30 Sleeve Nut (Preassembled) Eye Bolt Set (Preassembled) Screw Hook (Preassembled) Screw Hook (Preassembled)
  • Page 13 Parts used for trampoline assembly Spring 24 PCS 1 PC Frame Pad 1 PC L-S haped Tube (Left) 1 PC L-S haped Tube (Right) 1 PC Straight tube 1 PC Handlebar with Foam 1 PC Handlebar Base Tube (Left) 1 PC Handlebar Base Tube (Right) 1 PC...
  • Page 14 Elbow Tube 1 PC Elbow Tube Cap 2 PCS (Preassembled) 2 PCS Hablebar Base Tube Cap (Preassembled) Anchor 4 PCS Hardware use d for trampoline assembly Binder Post & Bolt Set M6x12 Bolt 2 SETS 8x52 Sleeve Nut (Preassembled ) Binder Post &...

  • Page 15: Tools Required For Assembly

    CARE AND MAINTENANCE Check all nuts and bolts every two weeks during usage season for tightness and tighten as required. It is particularly important that all nuts and bolts are checked prior to the first use of each season. TOOLS REQUIRED FOR ASSEMBLY Please prepare the following tools prior to assembling this equipment.

  • Page 16: Assembly Instructions

    ASSEMBLY INSTRUCTIONS  Place the playground equipment on level ground, no less than 6 feet (1.8 meters) from any structure or obstruction such as, a fence, garage, house, overhanging branches, laundry lines, or electrical wires.  Do no install the playground equipment over concrete, asphalt, packed earth, or any other hard surface.

  • Page 17: Assembly

    ASSEMBLY Step 1 Remove the two sets of pre-installed Hardware (Ba5) from the Glinder Attachment (B5).  Attach the Glinder Attachment (B5) onto the the Top Bar (A2), and tighten with pre-  installed Hardware (Ba5) that were previously removed. Remove the two sets of pre-installed Hardware (Aa1) from the Ladder Leg Supports (A10).
  • Page 18 ASSEMBLY Step 2 Ladder Legs (A3) Assembly Remove four sets of pre-installed Hardware (Aa3) from both sides of the Ladder Leg  Supports (A10). Insert four Ladder Legs (A3) into the Ladder Leg Supports (A10). Align the holes and secure using the four sets of pre-installed Hardware (Aa3) that were ...
  • Page 19 ASSEMBLY Step 3 Remove the twenty-four sets of pre-installed Hardware (Aa3) from Ladder Legs (A3).  Attach twelve Climbing Bars (A8) onto both Ladder Legs (A3) using the twenty-four sets of  pre-installed Hardware (Aa3) previously removed.
  • Page 20 ASSEMBLY Step 4 Attach the Protective Net (A12) onto the Legs (A3). ...
  • Page 21 ASSEMBLY B1 B1 Step 5 Remove two sets of pre-installed Hardware (Ba4) from the Glider Attachment (B5).  Install one set of Glider Vertical Pole Caps (B6) onto the top end of the Glider Vertical Pole  (B1). Install the Glider Vertical Pole (B1) onto the Glider Attachment (B5). Align the holes and secure ...
  • Page 22 ASSEMBLY Step 6 Remove one Glider Seats (B4) from the Glider Horizontal Poles (B2), and keep the hardware  for Step 7. Remove two sets of pre-installed Hardware (Ba1) from both Glider Horizontal Poles (B2).  Attach both Glider Horizontal Poles (B2) onto both Glider Vertical Poles (B1) using the two sets ...
  • Page 23 ASSEMBLY Step 7 Attach both Glider Seats (B4) onto the Glider Horizontal Poles (B2) using the two sets  of pre-installed Hardware (Ba3) that were previously removed.
  • Page 24 ASSEMBLY Step 8 Hang the Swing Chain (J1) in place from the Eye Bolts (Ja2) on the Top Bar (A2).  ․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․ Step 9 Hang the Trapeze Tube (T1) in place from the Eye Bolts (Ta2) on the Top Bar (A2). ...
  • Page 25 ASSEMBLY Do not tighten bolts until instructed to do so. Step 10  Insert the small ends of the L-Shaped Tube (Left) (S4A) and L-Shaped Tube (Right) (S4B) into the sockets of the Elbow Tube (S8). The welded bracket of the L-Shaped Tube (Left)(S4A) and L-Shaped Tube (Right) (S4B) should face outwards.
  • Page 26 ASSEMBLY Step 12  Lay out the Jump Mat (S2) and align the triangle rings of the mat with the holes in the L- Shaped Tube (Left) (S4A) and the L-Shaped Tube (Right) (S4B).  Attach a Spring (S1) with the hook facing down, onto the triangle ring of the Jump Mat (S2).
  • Page 27 ASSEMBLY Step 13  Slide the front two corners of the Frame Pad (S3) over the Handlebar Base Tube (Left) (S7A) and Handlebar Base Tube (Right) (S7B).  Lay the Frame Pad (S3) over the trampoline so that the Springs (S1) and the steel frame are covered.
  • Page 28 ASSEMBLY Step 15  Tie the straps of the Frame Pad (S3) to the triangle rings with a knot. Repeat this for all straps. Make sure the knots are tight and that the Frame Pad (S3) fits securely over the trampoline.

  • Page 29: Ground Anchor Installation

    GROUND ANCHOR INSTALLATION You may either anchor the feet in hard soil or if your soil is soft (sand, etc.), you may use the Corkscrew (A9) anchor to secure the playground. If you wish to permanently secure your swing set, setting the legs in concrete and secure with a brick or gravel bed is recommended.
  • Page 30 For Concrete Ground Installation:  If the swing set is set up on grounds with sandy soil, it must be anchored with concrete footing (concrete not included). Dig holes around swing leg tubes as shown in the drawing below. As you dig down to create a ...

  • Page 31: Warranty

    WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual.

  • Page 32: Parts Request Form

    PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECEIPT OF PURCHASE TO Service@paradigmhw.com NAME:______________________________________________________________________ ADDRESS:__________________________________________________________________ CITY:________________________ STATE:_____________ ZIP:________________________ TELEPHONE: (Day)_________________________________________________________ (Night)________________________________________________________ SERIAL#:____________________________________________________________________ MODEL#:____________________________________________________________________ PURCHASE DATE:____________________________________________________________ PLACE OF PURCHASE:________________________________________________________ PART # DESCRIPTION “YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS” *This form can also be faxed to #: 626-810-2166...

Table of Contents