USER GUIDE IVACFH60 Thank you for purchasing the Ivation® Fan Heater. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Page 2
or else the heater could overheat and become a fire hazard. • Do not cover the grilles or block the entry or exhaust of the airflow by placing the heater against any surfaces. Keep all objects at least 3.3" (1m) from the front, sides, and rear of the heater.
Page 3
not wet, with hot, soapy water only, and ensure device has been completely disconnected from the power supply before cleaning. • Do not plug the device into the power supply until it has been situated in its final location and adjusted to the position in which it will be used.
• If the power cord is damaged, you should have it replaced by a qualified electrician in order to avoid a fire hazard. • Do not use this appliance outdoors or on wet surfaces. Avoid spilling liquid on it at all times. •...
Package Contents • Fan Heater • User Guide Getting Started Before plugging the device into an electrical outlet, please be sure to verify that the voltage output of your power supply matches the rating label. Understanding the Power and Heat Settings SYMBOL FUNCTION 0 OFF Fan without Heater...
Using the Fan Heater Turn the fan/power control dial to your desired power setting. a. If you’d like the fan to operate without producing any heat, turn the dial to the symbol. b. If you’d like the heater to operate with low power, turn it to the number 1. c.
Care and Maintenance • Before any cleaning or device maintenance, make sure to fully disconnect it from the power supply and wait for it to cool completely. • For cleaning the heater, we recommend using a soft, moist cloth and a neutral detergent. Do not use an abrasive cloth or any devices which might affect the appearance of the appliance.
Need help?
Do you have a question about the IVACFH60 and is the answer not in the manual?
Questions and answers