Industrial-grade WiFi-CAN converter-GCAN-211 1. Introduction 1.1 Overview The GCAN-211 is a converter that integrates two CAN interfaces, one Ethernet interface and one WiFi interface. With GCAN-211, users can connect CAN-Bus networks and WiFi to extend the range of CAN-Bus applications.
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 2. Installation 2.1 Dimension drawings The shell size of the GCAN-202 is shown in Figure 2.1. Figure 2.1 Dimension drawings 2.2 Connect to PC Users can use WiFi to connect directly to the device.
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 2.3 Connect to CAN-Bus In practical use, most of the time just connected the CAN_H to CAN_H and CAN_L connected to CAN_L, then communication can be realized. Product data sheet...
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 3. converter used GCAN-211 converter uses a network cable to connect to PC, uses +9 ~ 30V DC power supply(recommended + 12V or + 24V power supply), uses the "GCAN-211 Config" software to configure.
Please note: you should connect the two ends of the resistor to CAN_L and CAN_H respectively. 3.4 Indicator light GCAN-211 converter has one PWR indicator, one SYS indicator, one LAN indicator, two CAN indicator, to indicate the converter status. More functions are shown in table 3.2.
"DownLoad" - download the configuration information to the converter's Flash "Open" - open the configuration information file in the PC "SaveAs" - save the configuration information file to your computer "UpDate App" - upgrade the GCAN-211 firmware kernel. (Please use this function under guidance) 4.2 Basic information After the connection is successful, click "UpLoad"...
Page 9
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 "IP Address Info" - WiFi side parameter setting "CAN1 / CAN2 Info" - CAN bus parameter setting 4.2.1 WiFi parameter settings Click "IP Address Info" to enter the WiFi parameter setting interface “IP Address Info”-set the WiFi IP address...
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 “Enable DHCP”-whether to use DHCP “Wifi SSID”-set the name of the WiFi, default: CANWIFI-II “Key Type”-set the encryption mode(WPA2 is recommended) “Key”-set the password for WIFI “Wifi Mode”-set the WiFi mode of operation “Connect AP SSID”-in the client mode, the name of the AP to be connected...
Shenyang Guangcheng Technology Co., Ltd. Industrial-grade WiFi-CAN converter-GCAN-211 configuration information into the "Flash" of GCAN-211 . Please note: power-on again after the completion of the download, and then the new configuration will take effect. 4.4 Save / load the configuration file You can click "SaveAs", save the data in the computer.
Industrial-grade WiFi-CAN converter-GCAN-211 5. WiFi connection 5.1 AP mode AP mode: GCAN-211 as a hotspot, receiving other WiFi device connection mode, like a wireless router. 5.2 Client(station) mode Client (station) mode: GCAN-211 as a client connected to the AP hotspot, the realization of wireless access network functions.
Need help?
Do you have a question about the 211 and is the answer not in the manual?
Questions and answers