Yamaha VS6 Quick Start Manual

English
PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting, damages,
fire or other hazards. These precautions include, but are not limited to, the
following:
Do not open
• This device contains no user-serviceable parts. Do not open the device or attempt
to disassemble the internal parts or modify them in any way. If it should appear to be
malfunctioning, discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Fire warning
• Do not put burning items, such as candles, on the unit. A burning item may fall over
and cause a fire.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of
physical injury to you or others, or damage to the device or other property.
These precautions include, but are not limited to, the following:
Location
• Do not place the device in an unstable position where it might accidentally fall over.
• Do not place the device in a location where it may come into contact with corrosive
gases or salt air. Doing so may result in malfunction.
• Before moving the device, remove all connected cables.
• Always consult qualified Yamaha service personnel if the device installation requires
construction work, and make sure to observe the following precautions.
- Choose mounting hardware and an installation location that can support the
weight of the device.
- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.
Connections
• Before connecting the device to other devices, turn off the power for all devices.
Before turning the power on or off for all devices, set all volume levels to minimum.
• Use only speaker cables for connecting speakers to the speaker jacks. Use of other
types of cables may result in fire.
Handling caution
• Do not insert your fingers or hands in any gaps or openings on the device.
• Do not operate the device if the sound is distorting. Prolonged use in this condition
could cause overheating and result in fire.
• Select a suitable power amplifier for use with this device (see SPECIFICATIONS).
Even if the output power of the amplifier is lower than the power rating (PGM) of this
device, use of excessive input signals resulting clipping may cause damage to the
device.
Malfunction or fire may occur especially when the following sounds or noises are
generated:
- feedback, when using a microphone
- continuous and extreme volume sound from a musical instrument
- extreme continuous distorted sound
- noise caused by plugging/unplugging the cable while the amplifier is turned on
Yamaha cannot be held responsible for damage caused by improper use or
modifications to the device.
UNPACKING
Unpack the contents and confirm that all the following items are included
Speaker × 2, Bracket × 2, Retaining knob × 4, Terminal cover × 2,
Terminal cover screw × 4.
Owner's Manual (this manual), SPECIFICATIONS
* Speaker cable not included.
1
MOUNTING THE SPEAKERS
Français
PRÉC
PRIÈRE DE
PROCÉD
* Rangez soigneus
AVERTIS
Veillez à toujours observ
éviter de graves blessure
circuit, de dégâts, d'un i
n'est pas exhaustive :
Ne pas ouvrir
• Cet appareil ne contient a
l'appareil et ne tentez pas
façon que ce soit. Si l'app
immédiatement hors tensi
Prévention contre l
• Ne placez pas sur l'appare
pourraient se renverser et
ATTENT
Observez toujours les pr
risque de blessure corpo
détérioration de l'instrum
toutefois pas exhaustive
Emplacement
• Ne placez pas l'appareil d
accidentellement.
• Ne disposez pas l'appare
gaz corrosifs ou de l'air à
dysfonctionnements.
• Avant de déplacer l'appar
• Veillez toujours à consulte
enceintes nécessite des t
les précautions ci-après.
- Choisissez un matériel d
pour supporter le poids
- Évitez les emplacement
- Utilisez les outils approp
- Inspectez l'appareil péri
Connexions
• Avant de raccorder l'appa
tension. Avant de mettre u
sonore sur le niveau minim
• Utilisez uniquement des c
correspondantes. L'utilisat
Précautions de ma
• Ne glissez pas les doigts
• N'utilisez pas l'appareil en
peut provoquer une surch
• Lors de la sélection d'un a
sortie de l'amplificateur es
SPECIFICATIONS).
Si la puissance de sortie d
l'appareil (programme), ce
un signal d'entrée excess
Un dysfonctionnement ou
génération des sons ou d
- Effet Larsen généré lors
- Volume sonore extrême
- Son déformé émis en c
- Bruit provoqué par le br
activé.
Yamaha ne peut être tenu r
impropre de l'unité ou par d
DEBALLAGE
Après le déballage, assurez