Table of Contents
Advertisement
CD/MP3 PLAYER
CD PLAYER
About MP3
The music compression technology MP3 (MPEG1
Audio Layer 3) significantly reduce the digital data of
an audio CD while maintaining CD quality sound.
Getting MP3 files: you can either download legal
•
music files from the internet to your computer hard
disc, or create such files by converting audio CD
files in your computer through appropriate encoder
software. (128kbps bit rate or higher is
recommended for MP3 files.)
Creating a MP3 CD: burn the music files from
•
your computer hard disc on a CDR or CDRW using
your CD burner.
Helpful hints:
Make sure that the file names of the MP3 files
–
end with .mp3
.wma
. or
Number of albums: maximum 50
–
Number of tracks: maximum 500
–
The length of file names affects the number of
–
tracks for playback. With shorter file names, more
files can be burned on a disc.
Playing a CD
This player plays Audio Discs including CD-R/ CD-RW,
MP3 CD and WMA. Do not try to play a CD-ROM, CD-
I, CDV, VCD, DVD or computer CD.
IMPORTANT!
CDs encoded with copyright protection
•
technologies by some record companies may be
unplayable by this product.
DRM-protected WMA disc is not supported.
•
1 Push the Source selector to CD/MP3.
• Press CD/USB once to select CD mode if "USB" is
displayed.
2 Insert a CD with the printed side facing up and
close the CD door.
™
is displayed as the CD player scans
the contents of a disc and then
Audio CD: total playing time and total number of
tracks appear. (See 3).
MP3/WMA: total number of tracks/albums appear.
3 Press 2; to start playback.
.
4 To pause playback press 2;. Press 2; again to
resume play.
5 To stop CD playback, press 9.
Helpful hints: CD play will also stop when:
– the CD door is opened
– the CD has reached the end
– you select tuner or CD/USB source.
Selecting a different track
• Press ∞ or § once or repeatedly until the desired
track number appears in the display.
For MP3-CD/WMA: first press ALBUM/PRESET
-, + (ALBUM - , + on the remote control) once or
more to find your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a track
1 During playback, press and hold ∞ or § (or
SEARCH 3,4 on the remote control).
™ The CD is played at high speed and low volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Different play modes: SHUFFLE and REPEAT
(See 4, 5)
You can select and change the various play modes
before or during playback, and combine REP ALL and
REP with PROG.
SHUF – tracks of the entire CD are played in
random order
REP ALL – repeats the entire CD/program
REP – plays the current track continuously
1 To select play mode, press MODE (SHUFFLE or
REPEAT on the remote control) once or more.
2 Press 2; to start playback if in the stop position.
3 To select normal playback, press MODE repeatedly
until the various modes are no longer displayed.
– You can also press 9 to cancel your play mode.
Advertisement
Table of Contents
