Advertisement
English
Supplied Accessories
– AC power cord
– Remote control
Top and front panels
(See 1)
1 VOLUME – adjusts volume level.
2 Source selector: CD/MP3,TUNER,
TAPE/OFF
– selects CD/MP3, tape or radio source of
sound
– power off switch
3 Cassette recorder keys:
PAUSE ; – pauses playback or recording
9/
STOP•OPEN
– stops playback or recording.
– opens the cassette holder.
F.FWD/REW 5 or 6 – fast winds/rewinds
the tape
PLAY 1 – starts playback
REC 0 – starts recording
4 Display – shows disc functions
2;
5
– starts or pauses CD/MP3 playback
§, ∞
CD/MP3: –
fast searches back and forward
– skips to the beginning of a cur-
rent track/ previous/ later track
ALBUM+
MP3 only: selects albums (up)
PROG – programs tracks and reviews the
program
6
IR
– infrared sensor for remote control
7 Cassette door
8 LIFT TO OPEN – lift here to open the
CD door.
9 TUNING – tunes to radio stations
0 MODE – selects different play modes: for
example, REPEAT or
SHUF-
FLE
(random order)
! BAND – selects wavebands
(FM or MW)
Controls
9
@
– stops CD/MP3 playback;
– erases a program.
Back panel (See 2)
# Telescopic antenna - improves FM recep-
tion.
$
AC
MAINS~ – inlet for power cord.
%
DBB
– turns the bass enhancement on/off.
^ p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
& Battery door – open to insert 6 x 1.5V R-
14/ UM2/ C-cells.
* Voltage selector – (not for all versions)
adjust to match the local voltage 110/220V
before plugging in the set
Remote control (See 2)
(for disc operations only)
1 MODE – selects different play modes: e.g.
REPEAT or
SHUFFLE
(ran-
dom order)
2;
2
– starts/ pauses CD/MP3 playback
9
3
– stops CD/MP3 playback;
– erases a program
4 ∞ §
CD/MP3: –
fast searches back and forward
– skips to the beginning of a cur-
rent track/ previous/ later track
5
ALBUM +
MP3 only: selects albums (up)
6 PROG – programs tracks and reviews the
program
Power Supply
Power supply
Whenever convenient, use the power cord if
you want to conserve battery life. Make sure
you remove the plug from the set and wall
outlet before inserting batteries.
Batteries
Main set (See 2)
•
Insert 6 batteries, type R-14, UM2 or C-
cells
(not included,
preferably alkaline) with
the correct polarity.
Remote control (See 2)
Important!
•
Before using the remote control, remove
the insulation plastic tab
as shown
below.
•
If the remote control does not function
correctly or the operating range is
reduced, replace the battery with a new
(CR2025) type battery
1 Press and hold the latch (A) in the direction
as shown.
2 Simultaneously, pull the battery tray (B) out.
3 Replace a new battery, and fully insert the
battery tray back to the original position.
1
2
B
A
3
•
Incorrect use of batteries can cause elec-
trolyte leakage and will corrode the com-
partment or cause the batteries to burst:
•
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
•
When inserting new batteries, do not try to
mix old batteries with the new ones.
•
Remove the batteries if the set is not to be
used for a long time.
Batteries contain chemical substances,
so they should be disposed of properly.
Using AC Mains
1 Check if the mains voltage, as shown on
the type plate located on the
bottom of the set, corresponds to your
local mains supply. If it does not, consult your
dealer or service center.
2
If your set is equipped with a voltage selec-
tor, adjust the selector so that it matches
with the local power supply.
3
Connect the mains lead to the
AC MAINS
~ inlet and the wall socket.The mains lead is
now connected and ready for use.
4
To switch the set off completely, withdraw
the mains lead from the wall socket.
5
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
•
Disconnect the mains lead from the wall
socket to protect your set during heavy
thunderstorms.
The type plate is located on the bot-
tom of the set.
Helpful hints:
–
To avoid unnecessary energy consumption,
always adjust the Source selector to
TAPE/OFF after using the set. Also check
that the tape deck keys are released.
CAUTION
Use of controls or adjustments or per-
formance of procedures other than
herein may result in unsafe operation.
Advertisement
