Using The Mains Rectifier - Waeco CoolPower MPS35 Installation And Operating Manual

_MPS-35.book Seite 17 Dienstag, 8. April 2008 11:18 11
CoolPower MPS35
7

Using the mains rectifier

Warning!
e
Do not reverse the polarity. If the poles are reversed device may
overheat and be damaged.
Caution!
e
Replace defective fuses with new ones of the same rating (15 A
slow-blow).
Caution!
e
Protect the positive connecting cable to the battery by an external
fuse of 10 A (fig. 2 4, page 3).
Insert the fuse as near as possible to the battery.
Determine the required cross section of the cable in relation to the cable
length according to fig. 3, page 3.
Key for fig. 3, page 3
Co-ordinate axis
l
∅
Connect the mains rectifier according to the circuit diagram in fig. 2,
page 3.
Key for fig. 2, page 3:
Item Explanation
1 Mains cable
2 Battery input terminals
3 Compressor output terminals
4 Fuse (not included in scope of delivery)
5 Battery
rt red
sw black
www.busse-yachtshop.de | info@busse-yachtshop.de
Meaning
Cable length
Cable cross section
Using the mains rectifier
Unit
m
mm²
17