Page 1
Our goal Muarah is to offer novel, luxury things – things with a bit of creator’s soul. Using those special things shall be a pleasure for its owner.
Page 2
Whereas our modern design should satisfy even the most demanding Hi-End audio lovers. MT-2 turntable was created based on our great experience from building best in class turntables. In fact it is result of evolution of Muarah MT-1 towards some simplification but also with great functionality extension of the device.
Page 3
+/- 8.5cm, ensures great compatibility with wide range of 9 to 12-inch tonearms. MT-2 turntable is in standard configuration offered with popular tonearms from Jelco. On customer's request we can offer free of charge adaptation plate for any 9-inch length tonearm. We recommend tonearms from reputable brands, such as: Jelco, SME, MORCH, REGA, CLEARAUDIO.
Page 4
USER MANUAL 3. Selection of the tonearms In general Muarah turntable is offered as a set with Jelco tonearm and w/o phono cartridge, however it is also possible to purchase the “deck only” version. Exchangeable tonearm mounting plate of the Muarah turntable causes, that practically the only limitation of tonearm selection is its effective length –...
Page 5
Muarah MUARAH MT-2 TURNTABLE USER MANUAL 2. Pay attention to place the turntable in appropriate distance from other electronic devices e.g.: amplifier (due to possible interferences). Recommended distance is minimum 20 cm. 3. Carefully pick up the platter covered in plastic bag. Take off the bag with patience, than leave the platter in safe place –...
Page 6
Muarah MUARAH MT-2 TURNTABLE USER MANUAL 12. Carefully remove the plastic sleeve preventing the bearing ball from slipping out of the bearing shaft. 13. Place the platter on upper part of the bearing with maximum care. 14. At the end, lay down the leather mat included in the box on the platter.
Page 7
5. Turn on / off and change of the platter rotary speed 1. Put the record on the turntable platter and eventually weight it on with the optional Muarah record clamp. 2. Gently press the switch on the top of the motor housing, a bright-green light indicates that the turntable motor is running.
Need help?
Do you have a question about the MT-2 and is the answer not in the manual?
Questions and answers