DURA-SAT DUR-line SF 4000 BT Quick Start Manual

DUR-line
®

Quick start guide

Test receiver for DVB-S/S2 signals

8 Pre-programmed satellites (editable)

Recognises the selected satellite

Bluetooth interface

Free app for additional functions

This is only a quick start guide!
i
Please also read the detailed instruction manual!
Video tutorial:
A video tutorial is available to view on YouTube.
Scan the QR code adjacent:
or
In the YouTube search bar enter: "DUR-line SF 4000 BT"
Service
Dear customer,
Thank you for choosing this high-quality product. Please do not assume that the device is defective if your product
does not immediately function as you would expect.
Please do not immediately send back the device. Contact us and DO NOT write a poo review. The device is in
complete working order.
Support: support@durline.de / Tel. +49 (0)7721-94646-10
Troubleshooting: see operating instructions page 10
Overview
1
8
9

Note regarding the
Power banks:
Only works with a
"large" power bank
with 2A.
Connections 1
2
Buttons 3
4
LEDs 5
6
7
8
9
Download App
The "DUR-line Finder" app is not required to use the Satfinder. The scope of
i
features is however expanded.
On your smartphone, open the App Store.
Enter "DUR-line Finder" as a search term or scan the QR code:
The "DUR-line Finder" app should then appear and can be
installed for free.
DUR-line
Finder
Using the app
i
DO NOT link the Satfinder via Bluetooth! Only open the app!
Start the app:
1. After downloading the app,
2. Click "Scan" to search using
3. Click on the detected
Note for Android users:
Permissions for location (GPS) must
be activated, otherwise Android
does not allow Bluetooth
connection.
App "Find" => "More" tab:
C/N: Level spacing from desired
signal and background noises –
Higher is better
LEVEL: Level in dBµV – Higher is
better
MER: Modulation error rate –
Higher is better
BER: Bit error rate - lower is better
Pre-programmed satellites
Satellites (editable):
SAT 1 Astra 19.2° E
SAT 2 Hotbird 13° E
SAT 3 Amos 4° W
SAT 4 Astra 4A 5° E (Sirius)
SF 4000 BT - Satfinder
Manual available for download
in other languages:
http://www.durline.de/qr/manual/sf4000bt.html
4
DC 5 - 18 V: Power supply connection (power supply unit, receiver, power bank...)
SAT/LNB: Connection to the LNB
TP: Briefly pressing this button switches the transponder
SAT: Briefly pressing this button changes the satellites
To activate or deactivate the loudspeaker, press and hold the SAT button for
2 seconds
Power: Operating voltage is available, the device is ready for operation
13/18 V: Green = horizontal band activated
0/22 Hz: Green = high band activated
QUALITY: The more LEDs illuminated, the better the quality
STRENGTH: The more LEDs illuminated, the better the reception
for Android 4.3
select the "DUR-line Finder"
icon.
the Satfinder.
Satfinder listed.
SAT 5
SAT 6
SAT 7
SAT 8
DURA-SAT GmbH & Co.KG
Unterer Dammweg 6/1
78050 VS-Villingen, Germany
See the reverse side for instructions
on how to align the antenna
7 3 6
Red = low band activated
for iOS 9.0
i
Türksat 42° E
Eutelsat 16° E
Astra 23.5° E
Astra 28.2° E
WEEE reg. no.:
DE 88896400
www.durline.de
2
i
Info
The signal is not
received by the
receiver/TV
5
Red = vertical band activated
Download the "DUR-line Finder" app
App "Find" tab
Modifications are required here if
searching for a very specific satel-
lite/transponder! (Further expertise
required!)
A satellite, the LNB oscillator
frequency and a transponder can
be selected
from the extensive drop-down
menu (click on the down arrow).
You can manually enter data or add
to the list using "Edit" or "Add".
App "TP Settings" tab:
The stored transponders
are displayed here.
These can be overwritten and saved
on the Satfinder with "Confirm".
Four transponders (TP1 to TP4)
can be assigned
to each satellite.
The following satellites are
already saved on the Satfinder
in the 8 different positions.
(Pro "SAT" position = 4 different
transponders)
Subject to changes and printing errors.
May only be copied and reproduced
with the permission of Dura-Sat GmbH.
Version dated 09/19
