Firmware Update - Digital Watchdog SiteWatch DW-DTLA500 User Manual

Web interface - Firmware update

5.3.4. Firmware update

The SiteWatch™ laser sensor's firmware should be updated when new versions are available.
To update the sensor's firmware:
1. Open the Firmware update tab. The sensor's current firmware version is displayed.
2. Press the 'Update firmware' button to enter the system bootloader.
3. In the bootloader, you have the option to upload a new firmware, clear all settings (restore factory settings) and
restore to the factory firmware.
4. Press 'Start firmware' to start the laser sensor's current firmware again.
5. Press 'Clear settings' to restore the unit to its factory settings.
6. Press 'Restore factory firmware' to restore the unit's factory firmware.
7. To upload a new firmware, press 'Choose File' and navigate to the location of the firmware file on your hard drive.
When a file is selected, the file name will be displayed next to the button.
Uploading a new firmware will erase all alarm and configuration settings.
NOTE:
8. Press 'Upload'. When the firmware file is uploaded, the unit will reboot the system with the new firmware.
9. After a reboot the firmware settings page will be shown again.
10. Press Start firmware button to restart the Night Watch™ laser with the new firmware.
14