Advertisement
Advertisement
Table of Contents
Summary of Contents for Red Sea ReefLED 50
- Page 1 User Manual...
- Page 2 Smart - Safe - Efficient User Manual...
-
Page 3: Table Of Contents
Red Sea ReefLED ™ Contents Introduction................5 Safety ...................6 ReefBeat app................7 Installation................8 Connection & Initial Setup..........10 Settings.................12 Additional Effects..............14 Connectivity modes.............15 Operation................16 Maintenance................19 Troubleshooting..............20 Warranty................22... -
Page 4: Introduction
Congratulations on your purchase of Red Sea’s ReefLED ™ Specifications ReefLED ReefLED ™ ™ Years of development are behind Red Sea’s ReefLED Wi-Fi lights which Compact LED array have been are designed to ensure optimal coral growth and maximum rendition of their vibrant colors. REEF-SPEC Blue ®... -
Page 5: Safety
Red Sea ReefLED ™ Safety PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS the connector. Use an extension cord, if necessary, to prevent water traveling along the cord and coming into contact with the receptacle. If DO NOT LOOK DIRECTLY AT LEDS REGARDLESS OF INTENSITY. -
Page 6: Reefbeat App
ReefLED) will be grouped together and, where appropriate, identical settings will be applied to all devices in the group. Any device can be If this is your first Red Sea connected device, it is recommended that you ungrouped at any time and have full functionality as an independent complete the physical installation of your ReefLED units before installing unit. -
Page 7: Installation
Setting Indicator LED will be off. part of the ReefLED gets wet, especially the DC jack. In the event that you are not using a Red Sea mounting system, please ensure the following: • The ReefLED must be fastened securely so that it cannot accidentally be dislodged from its mounting. - Page 8 Red Sea ReefLED ™ LED Indicators Settings Button - Function Power Indicator If indicator LED is off (ReefLED Wi-Fi is off): Pressing button for 5 seconds (until double blink) activates Wi-Fi AP Red light when DC power is available. mode.
-
Page 9: Connection & Initial Setup
ReefBeat user account and aquariums, and then you can start adding instructed by the app. your Red Sea connected devices. All of your user account details can be edited only when your SMD is connected to the internet. Connecting to the Home Network For full functionality Red Sea’s connected devices should be connected to... - Page 10 “Left LED”, “Right LED” etc. These names can be changed at any time using the “Rename” function from the Device Manager. Note: ReefLED 50 and ReefLED 90 units cannot be in the same group. For the first ReefLED you connect to your aquarium, you are asked to...
-
Page 11: Settings
Any number of D-Programs can be created in the Program Library for each aquarium and copied for use on other aquariums. From the Program library, D-Programs can be created, edited, deleted (except for the Red Sea defaults), previewed or selected to be applied directly as the current D-Program. Blue... - Page 12 Points without a delete icon in the settings flag cannot be deleted. Library and saving it with a new name. The default Red Sea D-programs can only be saved with a new name. Custom D-Programs can either be saved with new settings after editing, or with a new name while preserving its original settings.
-
Page 13: Additional Effects
Red Sea ReefLED ™ ReefLED - Additional Effects Staggered Sunrise Acclimation The staggered sunrise feature allows you to create an enhanced Acclimation allows corals to get used to the ReefLED lights by starting sunrise/sunset effect along the length of an aquarium for ReefLEDs at a lower intensity and gradually increasing the intensity every day that are grouped together. -
Page 14: Connectivity Modes
ReefLEDs or other as Staggered Sunrise. Copies of the same D-Program can be used for Red Sea connected devices are in use on the same aquarium. multiple ungrouped units. However, this and all other settings will have to be implemented one unit at a time. -
Page 15: Operation
ReefBeat homepage and the ReefLED Dashboard, and contains a list of all preferred mode of operation. of the Red Sea connected devices that are installed on each aquarium. The devices are listed according to type and in the order in which they were To enjoy all of the functionality that the ReefBeat system has to offer, the added to the aquarium. - Page 16 Red Sea ReefLED ™ Firmware Updates Removing a ReefLED - Temporary From time to time you may receive a notification that a new firmware When switching off or physically removing a ReefLED temporarily such as version is available for your ReefLED. It is important to keep your ReefLED...
- Page 17 85% capacity. In high ambient temperature environments, the fan speed will increase to 100% to maintain the correct working temperature If you have more than one Red Sea connected device and for the LED array. connection to one or more (but not all) devices are lost, you will receive a “Partial communication”...
-
Page 18: Maintenance
Red Sea ReefLED ™ Maintenance manually. Tapping on the row will open a time setting window which will For continued smooth running of the ReefLED, we recommended making show the current time on your SMD. Press "Set" or change the time as sure that it is clean, dry and free of any buildup of salt deposits on a needed. -
Page 19: Troubleshooting
Red Sea ReefLED ™ Troubleshooting A full and up to date FAQ for the ReefLED and the ReefBeat app is • Your router may be configured not to allow devices like the ReefLED available in the app ( ) and on our Homepage Main Menu >... - Page 20 Red Sea ReefLED ™ Q. According to the current D-Program, the LEDs should be working 6. If the current time was correct, disconnect and reconnect the power by but no light is on. the DC jack to restart. If it was not correct, try reconnecting the ReefLED to ReefBeat.
-
Page 21: Warranty
Any changes or improper installation, operation, mishandling, misapplication, alteration, modifications not expressly approved by Red Sea could void the user’s authority to operate the RF modification or service by anyone other than an authorized Red Sea Module and/or the product that incorporates the RF Module. - Page 22 Red Sea U.S.A Red Sea Europe UK & Ireland Germany & Austria China ドシー事業部 Red Sea Aquatics (UK) Ltd Red Sea Deutschland Red Sea Aquatics (GZ) Ltd 4687 World Houston Parkway 655 Rue des Frères 〒174-0063 Block A3, No.33 Hongmian Road, #150 Houston, Lumière 27130 Verneuil...
Need help?
Do you have a question about the ReefLED 50 and is the answer not in the manual?
Questions and answers
I'm trying to Install a redsea 50 light to my wifi. I bought it brand new and it is saying internet is unavailable. The light is blinking and my wifi is working
If the Red Sea ReefLED 50 shows "internet is unavailable," follow these steps to connect it to Wi-Fi:
1. Ensure your home network is available and has internet access.
2. Check that the ReefLED is positioned above the aquarium, as moving it may affect connectivity.
3. Open the ReefBeat app and look for available Wi-Fi networks.
4. Select your preferred network and wait for the ReefLED to connect.
5. If the connection fails, restart the ReefLED by disconnecting and reconnecting the power via the DC jack.
6. If there is no available Wi-Fi near the aquarium, set the device to "Offline" mode in the app.
7. If needed, install a Wi-Fi extender closer to the aquarium to improve signal strength.
If the issue persists, follow any additional troubleshooting steps or contact customer support.
This answer is automatically generated