Advertisement
Introduction
This CleatMaster fitting guide shows you how to perform a
cleat fitting service using the CleatMaster line of tools
from VeloBene Bicycle Products.
Once the cyclist has been fit to a bicycle, you can then set
the cleat alignment. If you do not have a fit method
currently in use, please visit the VeloBene web site for a
free fitting method guide.
www.velobene.com
A complete cleat adjustment service performed in concert
with a VeloBene fitting service can be performed in ~30
minutes by an experienced bicycle fitter.
This manual shows a pair of Shimano SM-SH51 cleats
being fit to a cyclist using a dedicated fit cycle and the
CleatMaster SPD. The steps are the same for Shimano
SPD-SL and Look KēO.
Thank you for using CleatMaster; Cleat Position Matters!
VBP-DOC-901
-2-
May 2013
Advertisement
