Page 3
Liability Disclaimer bioMérieux, Inc. makes no express or implied warranty regarding this manual, its quality, performance, or appropriate use regarding any type of specific procedure. Furthermore, this manual may be modified by bioMérieux without notice and without implying any obligation or liability on the part of the company. Intellectual Property No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language (human or computer) in any form, or...
Page 4
BacT/ALERT® i FA, i FN, and i PF Bottle Barcode Activation Instructions 514550-1EN1 REV 10/2007...
T/ALERT 3D T/VIEW U WITH PDATE ROCEDURE This chapter provides instructions on enabling BacT/ALERT® i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottles on your BacT/ALERT 3D with BacT/VIEW® system. If you cannot successfully complete this procedure for any reason, contact bioMérieux immediately.
Page 8
Activation Procedure BacT/ALERT 3D with BacT/VIEW Update Procedure Figure 1-1 Removing the Barcode Reader through the Barcode Reader Aperture Cut the tie strap to remove barcode reader. DO NOT CUT the barcode reader cable connection. ____5. Scan all barcodes, in order, as directed by the dialog box. Note - If the computer beeps and the dialog box background turns yellow, then a barcode was scanned out of order.
Page 9
BacT/ALERT 3D with BacT/VIEW Update Procedure Activation Procedure Part 2: Entering Barcodes into a BacT/VIEW System Perform the following procedure to enter new bottle types or to update current bottle types using the barcodes found in “Barcodes” on page ____1. Ensure that the software version of your BacT/VIEW is C.30 or above. If not, install the latest update before proceeding.
Page 10
Activation Procedure BacT/ALERT 3D with BacT/VIEW Update Procedure BacT/ALERT® i FA, i FN, and i PF Bottle Barcode Activation Instructions 514550-1EN1 REV 10/2007...
T/ALERT 3D OBSERVA R03.00 U WITH PDATE ROCEDURE This chapter provides instructions on enabling BacT/ALERT® i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottles on your BacT/ALERT 3D with OBSERVA® R03.00 system. If your system is not currently running OBSERVA R03.00 or you cannot successfully complete this procedure for any reason, contact bioMérieux immediately.
Page 12
Activation Procedure BacT/ALERT 3D with OBSERVA R03.00 Update Procedure Figure 2-1 Removing the Barcode Reader through the Barcode Reader Aperture Cut the tie strap to remove barcode reader. DO NOT CUT the barcode reader cable connection. ____5. Scan all barcodes, in order, as directed by the dialog box. Note - If the computer beeps and the dialog box background turns yellow, then a barcode was scanned out of order.
Page 13
Activation Procedure Part 2: Activating Barcodes in the OBSERVA R03.00 System BacT/ALERT i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottle barcode information is pre-programmed into the OBSERVA® R03.00 system; so no scanning is necessary. However, there is a file setting that must be changed in the system in order to enable the viewing and use of the bottles.
Page 14
Activation Procedure BacT/ALERT 3D with OBSERVA R03.00 Update Procedure BacT/ALERT® i FA, i FN, and i PF Bottle Barcode Activation Instructions 514550-1EN1 REV 10/2007...
T/ALERT 3D (S ELECT OR ELECT PDATE ROCEDURE This chapter provides instructions on enabling BacT/ALERT® i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottles on your BacT/ALERT 3D (Select™ or SelectLink™) system. If you cannot successfully complete this procedure for any reason, contact bioMérieux immediately.
Page 16
Activation Procedure BacT/ALERT 3D (Select or SelectLink) Update Procedure ____5. Scan all barcodes, in order, as directed by the dialog box. Note - If the computer beeps and the dialog box background turns yellow, then a barcode was scanned out of order. Scan the barcode corresponding to the number Note that is displayed on the dialog box to continue.
LASSIC WITH PDATE ROCEDURE This chapter provides instruction on enabling BacT/ALERT i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottles on your BacT/ALERT® Classic with BacT/VIEW® software. If you cannot successfully complete this procedure for any reason, contact bioMérieux immediately.
Page 18
Activation Procedure BacT/ALERT Classic with BacT/VIEW Update Procedure BacT/ALERT® i FA, i FN, and i PF Bottle Barcode Activation Instructions 514550-1EN1 REV 10/2007...
T/ALERT C LASSIC PDATE ROCEDURE This chapter provides instructions on enabling BacT/ALERT® i FA, BacT/ALERT i FN, and BacT/ALERT i PF bottles on your BacT/ALERT Classic Text system. If you cannot successfully complete this procedure for any reason, contact bioMérieux immediately. Activation Procedure Perform the following procedure to enter new bottle types or to update current bottle types using the barcodes found in...
Page 20
Activation Procedure BacT/ALERT Classic Text Update Procedure BacT/ALERT® i FA, i FN, and i PF Bottle Barcode Activation Instructions 514550-1EN1 REV 10/2007...
Need help?
Do you have a question about the BacT/ALERT i FA and is the answer not in the manual?
Questions and answers