Dali GQ-75 Instruction Manual page 5

MAJOR COMPONENT DESCRIPTION AND OPERATING CHARACTERISTICS
Stanby
Woildng
•k
J^iuuauaj
Control Knob
For switching on/off circuit and controiiing rotation direction of
output shaft.
OFF :Stop
FOR : forward rotation
REV ; reversed rotation
* Warning: Prior to connecting electric power supply check switch
first for position off.
Operate Control Handle
Press the handle to move the machine clutch, which makes the
flexible shaft to rotate.
Releasing the handle stops the flexible shaft rotation immediately.
* Warning: The pressing force shall not exceed 20kg, preferably to
the extent of locking the flexible shaft. Do not use force multipli
cation tool.
Initial state is"standby". Cog down state is"working'