Magnifying Aids 835888 Quick Start Manual

Talking Clock with EZ Talk Button
Item: 835888
INSTRUCTIONS

Buttons on Clock

On bottom right side, largest button on clock, which is Green: Talk
button to announce time
Mode button: changes between modes
Hour button: changes hours for setting time and alarm
Minute button: changes minutes for setting time and alarm
Volume control: controlled by a switch. Switch is to the left of the Mode
button.
Switch, has position on left is low volume and position on right is high
Clock is in a rectangular shape, Time button on far right, Mode, Hour and
minute button in the order of:
Mode, Hour, Minute
These three buttons are located to the left of the talk button.
Volume control is at the far left of the clock.

To announce the time

Press THE TALK BUTTON (GREEN, AT FAR RIGHT OF CLOCK) to hear the time
announcements.
Slide the VOLUME switch (AT FAR LEFT OF CLOCK) to change voice volume.

To set 12H/24H time format

1. In the time-display mode, press the MODE button once to enter the
12/24hour-setting mode.
2. Press the Hour button to set the time telling mode to "12 Hour" or
press the MINUTE button to set "24 Hour, (military time)".
3. Press the MODE button twice until the mode beeps three times to return
to the Time-display mode.
Note: During setup, if no key is pressed for more than 30 seconds, the
clock will return to Time-display mode.

To set the time

Press the Mode button once.
Press the Hour button until you reach the correct hour.
Press the minute button to set the correct minute.
Press the Mode button twice to return to the time setting mode.

To set the alarm time

Press the Mode button twice to set the alarm.
Press the Hour button until you reach your desired hour for your alarm.
Press the minute button to set the minutes for your alarm.
Press the Mode button once to return to the time display mode.

To turn on and off the alarm

To turn on the alarm, press the HOUR button once.
when turning on the alarm, the clock will beep three times and announce
the time your alarm is set for.
When turning it off, it will beep once, which means the alarm is off.