Oemtools 26028 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual 26028
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
SLIM FOLDING
RECHARGEABLE WORK LIGHT
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. DO NOT use OEMTOOLS™
26028 Slim Folding Rechargeable Work Light if broken, bent,
cracked or damaged parts (including labels) are noted. Any
Work Light that appears damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Work Light was
subjected to a shock load (a load that was dropped suddenly,
unexpectedly, etc.), immediately discontinue use until it has
been checked by a factory authorized service center.
MAX OUTPUT MAX RUN TIME
MAX RUNTIME MAX RUNTIME
High Low
High Low
350 175
2h
4h
LUMENS LUMENS
WARNING
The following safety information is provided as a guideline to help you operate your Slim Folding Rechargeable Work Light
under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or
safe handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your
Slim Folding Rechargeable Work Light. Failure to follow instructions listed below may result in serious injury. In addition, make
sure that anyone who uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS Product!
™
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS cannot be responsible for issues
™
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
10/18 1
2018 OEMTOOLS
™