Related Manuals for R+M Suttner G&S ST-73
Summary of Contents for R+M Suttner G&S ST-73
- Page 1 ST-73 Foam Lance Manual • • • • Tel: 0 768 86 98 Fax: 0 768 890033 Email: . . k Website: www. . . k...
-
Page 2: Intended Use
Description The ST-73 is for foaming suitable foaming agents. The ST-73 foam lance is fitted with an interchangeable injector nozzle and a foaming pad. By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. General Safety Notes To guarantee safe operation the injector unit may only be used in accordance with these •... - Page 3 Operation Instructions By turning the adjustable grip on the handle the quantity of foaming agent concentrate can be adjusted. In total the ST-73 has five fixed positioning points for varying the dosage. Selection is achieved by turning the adjustable grip. Position Dilution Rate 2-2.5%...
-
Page 4: Technical Data
Cleaning & changing the injector nozzle Cleaning/Changing the injector nozzle Unscrew the injector nozzle (2) from the ST-73 foam lance (1) Check to see whether the injector nozzle (2) is only lightly soiled, in which case careful cleaning by inserting a suitable piece of wire or similar, will usually clear the problem.
Need help?
Do you have a question about the G&S ST-73 and is the answer not in the manual?
Questions and answers