Philips FW-C80/25 User Manual page 9

Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 POWER SAVE
– to switch the system to energy saving
mode.
3 IR SENSOR
– sensor for the infrared remote control.
4 PROG (PROGRAM)
for CD ............ to program CD tracks.
for TUNER ..... to program preset radio
stations.
for CLOCK ..... to select 12 or 24 hour
in clock setting mode
(on the system only) .
5 BASS/TREBLE
– to select Bass/Treble sound feature.
6 VEC
– to select Virtual Environment Control
sound feature.
7 DIGITAL SOUND CONTROL (DSC)
– to select Digital Sound Control
feature.
8 JOG
– to select the desired sound effect of
DSC/VEC setting. You must select the
respective sound feature first.
DIGITAL SOUND CONTROL
– to select the desired Digital Sound
Control effect : OPTIMAL, CLASSIC,
TECHNO, VOCAL, ROCK or JAZZ.
pg 01-26/C80/22-Eng 9
VEC
– to select the desired Virtual
Environment Control effect : HALL,
CLUB, DISCO, CINEMA, CONCERT or
ARCADE.
9 CLOCK/TIMER
– to view the clock, set the clock or set
the timer.
0 n
– to connect headphones.
! DIM
– to select brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM
OFF.
@ SOURCE – to select the following:
CD / (CD 1•2•3)
– to select CD mode. When CD playback
is stopped, press to select disc tray 1,
2 or 3.
TUNER / (BAND)
– to select Tuner mode. When in tuner
mode; press to select the waveband:
FM, MW or LW.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX / (CDR/DVD)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder). When in
AUX mode, press to select either AUX
or CDR/DVD.
# DISPLAY SCREEN
– to view the current setting of the
system.
$ CD CAROUSEL TRAY
% DISC CHANGE
– to change CD(s).
^ OPEN•CLOSE
– to open or close the CD carousel tray.
& DISC 1 / DISC 2 / DISC 3 (CD
DIRECT PLAY)
– to select a CD tray for playback.
* NEWS/TA
– to hear News or Traffic Announcement
data automatically.
( RDS
– to select RDS data in the following
order: station name, program type and
radio text.
) MODE SELECTION
SEARCH à á (TUNING à á )
for CD ............ to search backward/
forward.
for TUNER ..... to tune to a lower or
higher radio frequency.
for TAPE ........ to rewind or fast
forward a tape.
for CLOCK ..... to set the hour (on the
system only) .
STOP•CLEAR Ç
for CD ............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
3/6/00, 2:23 PM
CONTROLS
for DEMO ...... (on the system only) to
start or stop
demonstration mode.
PLAY PAUSE ÉÅ
for CD ............ to start or interrupt
playback.
for TAPE ........ to start playback.
í PREV / SIDE / NEXT ë
(PRESET 4 3 )
for CD ............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset radio
station in memory.
for TAPE ........ to select tape side
(back or front) in tape
deck 2 only.
for CLOCK ..... to set the minute (on
the system only) .
¡ RECORD
– to start recording on tape deck 2.
™ VOLUME
– to increase or decrease the volume.
£ DUB (HSD) (HIGH SPEED
DUBBING)
– to dub a tape in normal or fast speed.
≤ BASS/TREBLE CONTROL – to
adjust BASS/TREBLE level :
BASS 3 4 (BASS +/-)
– to increase or decrease the low tone.
TREBLE 3 4 (TREBLE +/-)
– to increase or decrease the high tone.
3139 116 19681
9