Glasdon SIGNMASTER SUBLITE Installation Instructions

Download this manual

SIGNMASTER SUBLITE INSTALLATION INSTRUCTIONS

Ensure that personnel carrying out this conversion have the relevant qualifications/certificates and all work

is carried out in accordance with BS6771:2008/I.E.E. Wiring Regulations 17th Edition.

Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given to staff

involved with the installation and maintenance of this product.

Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.

KIT CONTENTS

- Signmaster Bollard

- M10 x 100 Screw

- M10 x Ø50 White Washer

- Spacer

- Gasket

- LED Lighting Unit

Underground Box

- Concrete-In Bars

Allen Key 6mm

Optional Extras

Installation Lid

Splitter

Ducting Chamber

EQUIPMENT REQUIRED

-Spade

-Spirit Level

-Concrete Mix (we suggest using a quick setting

concrete i.e. QC10 for all installations)

-Jack Hammer

- Hand Drill

-Safety Equipment (hard hat, mask, goggles,

re ective clothing, etc)

Please note that diagrams are not to scale

Need help?

Do you have a question about the SIGNMASTER SUBLITE and is the answer not in the manual?

Page 1 Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given to staff involved with the installation and maintenance of this product. Glasdon recommends that a full Health and Safety analysis is carried out prior to installation. KIT CONTENTS...
Page 2 In coming Installation using Installation using Optional Installation Lid 24 V or 240V (Highly Recommended) Electrical Ducting Supply Installation If using an optional Installation Lid position on to the If using 100mm ducting, cut to size and o er either into the xing bars on the Underground Box prior to installation.
Page 3: Installation Instructions
MINIMUM HOLE DIMENSIONS Note: Take care to avoid buried services when excavating the hole. Adjust depth and width of hole when using a Splitter or Ducting Chamber. Diagram E Installation Instructions Diagram F Diagram G Diagram H Measure and mark out the hole using Excavate the hole using a jack Clear the hole of rubble and lay gravel chalk and begin by slot cutting...
Page 4 • Replacement components are available direct from GLASDON. Preston New Road BLACKPOOL • GLASDON cannot be held responsible for claims arising from incorrect installation, Lancashire FY4 4UL unauthorised modifications or misuse of the product. Tel: 01253 600410 Issue 1 March 2010 Stock no.