Philips FW-C83/25 User Manual page 12

OPERATING THE SYSTEM
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
Volume Control
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
1 Press MUTE on the remote control to
switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME level
to switch on the sound.
12
pg 01-29/C85-C83/22-Eng 12
Sound Control
For Optimal sound listening, you can
only select one of the following sound
control at a time : PERSONAL, DSC,
VEC or BASS/TREBLE.
PERSONAL SOUND
You can store upto 6 personal settings.
1 Press to select the PERSONAL feature.
2 Adjust the JOG to select the desired
Personal setting.
™ The selected personal setting number
will be encircled.
™ If no name has been stored
previously, "PERSONAL X" will be
displayed. "X" is the setting number.
Personal Setting
You can adjust the personal setting to your
desired level with the JOG control.
1 Press and hold PERSONAL for about 5
seconds to switch on the personal
setting mode.
™ "SELECT PRESET NUMBER"
will be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting and
press á to confirm the selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for low
frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed and the next followed
by "ADAPT HIGH FREQ
LEVEL".
• Repeat step 3 - 4 to select the desired
mid and high frequencies Spectrum
Analyzer band levels.
5 You can choose to edit the name for the
personal setting.
™ The first character of setting name
will be flashing.
6 Adjust the JOG to select the desired
alphabet, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will be
flashing.
• Repeat step 6 - 7 to store up to 10
characters.
8 To store the setting, press PERSONAL
again.
• Before storing the setting, you can
press à to retrace the steps in the
reverse order.
• To exit without storing the setting,
press Ç .
3/6/00, 1:00 PM
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– wOOx level cannot be stored as part of
the personal setting.
– It is not possible to adjust Bass/Treble
level during personal setting, " USE
JOG " will be displayed.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO, VOCAL,
ROCK or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For neutral setting, select CLASSIC.
3139 116 19611