Manual Preset Programming; Tuning To Preset Radio Stations; Erasing A Preset Radio Station - Philips FWC170/25 User Manual

To stop storing the automatic preset
G Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.

Manual Preset Programming

1
Tune to your desired radio station (refer to
"Tuning to radio stations").
2
Press PROGRAM.
➜
starts flashing.
PROG
➜ The next available preset number is displayed
for selection.
To store the radio station to another
preset number
G Press í or ë to select the desired preset
number.
3
Press PROGRAM again to store the radio
station.
➜
disappears.
PROG
G Repeat steps 1–3 to store other radio stations.
To exit manual preset mode
G Press Ç on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the programme
mode automatically.

Tuning to preset radio stations

G Once you've programmed the radio stations,
press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
Radio Reception

Erasing a preset radio station

1
Press í or ë to select the preset radio station
to be erased.
2
Press and hold Çon the system until "PRESET
DELETED" is displayed.
➜ The deleted radio frequency remains on the
display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
G Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to "Tape
Operation/Recording".
19