1. Manuals
  2. Brands
  3. FLAMENEO Manuals
  4. Indoor Fireplace
  5. PYRAMID
  6. Installation manual

FLAMENEO PYRAMID Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
model "PYRAMID"

Advertisement

Table of Contents
loading

Summary of Contents for FLAMENEO PYRAMID

  • Page 1 INSTALLATION MANUAL model “PYRAMID”...
  • Page 3 WELCOME Thank you for choosing the product FLAMENEO You are only a few steps away from your experience with your fireplace “PYRAMID”...
  • Page 4 PACKAGING All the components have been packed so they are delivered safely and without damage. Take out the components carefully and keep the box for the case of claim or return of the product.
  • Page 5 CONTENT OF THE PACKAGING (D)Holder (E) Side Fireplace Grate Stopper of the part of the base fireplace fireplace base Connecting Nut pad Poker plate...
  • Page 6 INSTALLATION In the following 5 steps we will present you the installation process. Ask a second person for assistance. It will be easier, safer and more fun.
  • Page 7 STEP 1 1. Put the fireplace holder (D) into the prepared openings on the inside of the side part of the fireplace (E). 2. While inserting, expand both sides of the side part of the fireplace (E) as the arrows show in the picture below. 3.
  • Page 8 STEP 2 1. Place 2 side parts of the fireplace (E) to each other. 2. Put on the connecting plate (F) with twists into the openings on the side parts of the fireplace (E) 3. With the help of the nuts (H) secure the connetion of the side parts of the fireplace (E).
  • Page 9 STEP 3 1. Put the fireplace base (A) onto the holders of the fireplace base (D) 2. While putting in the fireplace base (A) be careful not to damage the side parts of the fireplace (E). 3. We recommend to keep the protection covers of the edges and remove these only after the placement of the fireplace base (A).
  • Page 10 STEP 4 1. Place the stopper (C) onto the opening of the fireplace base (A). You will avoid that the ashes get onto the floor. 2. Make sure that the orientation of the stopper (C) is identical to the image in the picture below.
  • Page 11 STEP 5 1. Place the grate (B) onto the fireplace base (A). The space under the grate will enable the air to flow and therefore support burning. 2. Make sure that the orientation of the grate (B) is identical with the image in the picture below.
  • Page 12 YOUR FIREPLACE...
  • Page 13 MAINTENANCE 1. Before you start with the cleaning of your fireplace make sure that it is cold and completely extinct. 2. Place a container under the base of the fireplace (A) (not included in the packing) 3. Place the poker (J) on the hook which is on the stopper (C) and by pulling upwards take out the stopper (C) together with the grate (B) and remove ashes and other dirt.
  • Page 14 Do not use the fireplace if a correct assemblage has not been executed. 2. Fuel In the Flameneo fireplaces only wood, wooden briquettes or pellets can be burned. It is forbidden to burn liquid fuel and waste. In no way use highly flammable substances to start the fire (e.g.
  • Page 15 SAFETY NOTIFICATIONS 4. Safety distances In the visible area of the fire where it comes to the direct heat radiation, a minimum distance of 110 cm must be kept from flammable materials (e.g. flammable parts of construction, wood, furniture, decorative textiles, carpets, curtains etc.) The distance is measured from the side part of the fireplace (E).
  • Page 16 www.flameneo.com...

Table of Contents