Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18e
Advertisement
Table of Contents
Summary of Contents for Ames Instruments 64014
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 64014... - Page 3 Power this Meter using only reflexes are impaired while taking the battery(ies) referenced in drugs. If there is any doubt, the Specifications Chart. do not operate the meter. Item 64014 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Safety
SaVE tHESE inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 64014... -
Page 5: Specifications
Range: 32°F - 104°F (0°C - 40°C) Operating Humidity <80% RH Overload Protection (mA jack) FF 400mA H 600V fuse (F2) (A jack) FF 10A H 600V fuse (F1) Display Battery 9V (included) Item 64014 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Functions Display Data Hold range Button Button Function Button non-contact Voltage Button rotary Switch Stand (on back) input Jack Jack cOM Jack Page 6 For technical questions, please call 1-888-866-5797. Item 64014...
- Page 7 Indicates that display data is being held Diode test Continuity buzzer Battery low indicator Direct current Alternating current °c °F Celsius / Fahrenheit (temperature) kMΩ Ohms, Kilohms, Megohms (resistance) Milli/Micro, Volts (voltage) / mμVA Amperes (current) Item 64014 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Setup
Display and you range up until the highest is reached. can release the ran Button. Page 8 For technical questions, please call 1-888-866-5797. Item 64014... - Page 9 To turn the Meter back on after auto- off, press any Button or turn the rotary switch. To disable Auto Power-Off, press and hold down the HOLD Button when powering on the Meter. Item 64014 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operation
WarninG! To prevent electric Press Func to switch between shock, remove Thermocouple before Celsius and Fahrenheit. switching between testing modes. Touch the tip of the Thermocouple to the object to be tested. Page 10 For technical questions, please call 1-888-866-5797. Item 64014... -
Page 11: Continuity Measurement
Read measured resistance note: When leads are disconnected on the Display. or measurement is out of range, OL is displayed. Item 64014 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Diode Measurement
Rotary Switch to OFF, remove WarninG! To prevent damage to Test Leads and store with Meter. the Meter, never measure open-circuit voltages exceeding 600V between the input terminals and ground. Page 12 For technical questions, please call 1-888-866-5797. Item 64014... -
Page 13: Battery Test
When testing is complete, turn positive (+) terminal of the battery Rotary Switch to OFF, remove and the black test lead to the Test Leads and store with Meter. negative (-) terminal of battery. Item 64014 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Battery Replacement
Remove four screws from back cover, from back. Save the screw. one from each corner. Save screws. Carefully remove battery cover and One screw at tilt stand from back of meter. each corner. Screw Page 14 For technical questions, please call 1-888-866-5797. Item 64014... - Page 15 Have the Meter calibrated by a qualified technician every year. record Serial number Here: note: If product has no serial number, record month and year of purchase instead. Item 64014 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Maintenance
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 64014 and is the answer not in the manual?
Questions and answers