Page 2
The purpose of this manual is to provide AquaLens users with a clear understanding of operating procedures. If further information is needed, contact Aquabotix at info@aquabotix.com. website: www.aquabotix.com Aquabotix reserves the right to make changes to the speci cations of the AquaLens at any time without notice.
Legal Disclaimer Important Safety Instructions Assemble and use AquaLens only as instructed by this manual. Read and follow these important safety instructions and the detailed assembly in this manual prior to using the Aqualens. Follow all safety and operational warnings. Heed all additional restricitons on use.
Legal Disclaimer AquaLens is meant for depths no greater than 10 meters from the water surface. Do not go beyond this depth due to limitation as opera- tional safety is not tested and rated for such depths. Secure all cables on board to prevent tripping hazards. Do not submerge cable connector plugs, let them get wet or handle them with wet hands.
Page 6
Legal Disclaimer Failure to follow these important safety instructions and the detailed assembly and use instrucitons of this manual will void your limited warranty from Aquabotix and may result in serious injury or death. Aquabotix disclaims all liability arising from or caused by the failure to assemble and use AquaLens in accordance with this manual, including all important safety intructions.
Page 7
Overview (attach to forearm) 3.5” LCD screen arm band Built in connection video out (composite) + 12 VDC connector (attach to belt) standard 15 ft. cable (optional longer length available) Universal t to any pole standard attacher + universal pole strap Viewing sphere video camera LED lighting...
AquaLens Assembly Pole Attachment (prefered method) If using a boat hook with threaded end: Thread the angular adapter into the hole on the back of the viewing sphere. Be sure to align the angular adapter vertically with the camera. Thread your boat hook into the angular adapter.
AquaLens Assembly LCD Screen Attachment Attach your forearm strap to the LCD screen. Turn the AquaLens on with or without LED lighting, using the knob on the topside box. You’re now ready to take a look at the underwater world! Removing Dome To remove dome, turn counter clockwise and remove.
Page 11
AquaLens Assembly Batteries Remove dome, turning counterclockwise. Use caution when handling your dome to prevent scratches and to protect clarity. Use caution when handling O-ring to be sure the area remains clean to ensure a water tight seal. With viewing sphere facing you, loosen, not remove, both screws with your ngers.
Maintenance Recommended Replacement Periods 1. O-ring: Every 6 months. 2. Moisture absorbing pack (pg.10): Every 6 months. To purchase these from Aquabotix, visit our online store---accessed through our website at http://www.aquabotix.com/categories.php. Replacing O-ring 1. Remove dome, turning counter clockwise. 2. To remove O-ring, use an O-ring removal tool or something at that can get it out, such as a at head screwdriver or tweezers.
Maintenance Replacing Moisture Absorbing Pack 1. Remove dome, turning counter clockwise. Use caution when handling O-ring to be sure the area remains clean to ensure a water tight seal. 2. Pull off black cap. 3. Moisture absorbing pack will be exposed. 4.
Troubleshooting & Speci cations Troubleshooting LCD screen not working: - Ensure power switch is in the ON position. - If lights are on, but LCD screen is off, make sure LCD screen cable is attached. - If LCD screen is ickering, replace the batteries. If AquaLens is leaking: - Replace the O-ring.
Warranty Aquabotix's AquaLens One Year Limited Warranty Certi cate Aquabotix warrants that, under normal use and service, the AquaLens will be free from defects in material and workmanship for one year from the date of purchase by the original purchaser. If Aquabotix receives, during the applicable warranty period, notice of defect in any product which is covered by Aquabotix's warranty, Aquabo- tix shall either replace or repair the product at Aquabotix's discretion.
Page 16
Innovation for the Underwater World Aquabotix Technology Corporation 1082 Davol St (L102) Fall River, MA 02720 www.aquabotix.com...
Need help?
Do you have a question about the AQUALENS Series and is the answer not in the manual?
Questions and answers