Searching for Bluetooth Devices and Connecting
Go to
•
WIRELESS
audio devices and then connect any detected devices to the projector.
(If the device name is longer than 20 characters, no more than 20 will be
displayed.)
1
Set the Bluetooth device to pairing mode and then select
•
Select
Stop searching
•
If the device has not been detected, check that the device is powered on and
in pairing mode.
•
The time it takes to search for devices may vary according to the signal
strength and the number of devices.
•
Search Device
to view the devices detected so far.
WIRELESS
• SCREEN SHARE
: [PJTR][LG]PH450UGV[0000]
• Group
• Channel
• Bluetooth
: On
• Search Device
• List of registered devices
• AV Sync. Adjust
to search for nearby Bluetooth
Search
Device.
ꔂ Move ꔉ OK
41