There are two standard sizes of the goods cage, either with a gas assisted ramp or a secure gate. The ramp offers the ability to load the cage using pallet truck and sack barrows.
Goods Cage 1638 Goods Cage 3277 There are no replaceable parts on this option. Ramped Goods Cage 1658 NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries. Item Number Part Number Description...
Page 5
Parts Diagram Parts Diagram Short End Ramped Goods Cage 3277 Long End Ramped Goods Cage 3277 NOTE: These parts are for this model, they may differ for previous versions. Please contact Conquip with any queries. Item Number Part Number Description...
Your risk assessment will determine the correct Personal Protective Equipment (PPE) • The Goods Cage must only be lifted by the designated four lifting points or for the task you are doing. You must use it. Conquip recommends that you should wear: the integral fork pockets. •...
If any third-party modifications or alterations, involving drilling, welding, cutting or distortion of materials in any form, are to be carried out on the product, Conquip Engineering Group must provide full written approval •...
In accordance with EN ISO 17050-1:2004 Declaration: As defined by the Machinery Directive 2006/42/EC and subsequent amendments We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets the fundamental health and safety requirements concerning the EU guide line(s), due to their design and manufacture.
Important Notes • This User Guide is for this Conquip product only. • Any movements of the product must be thoroughly planned before the work commences to identify potential hazards and assess risk. • All personnel involved in lifting and transportation of this product must have read this User Guide and must be properly briefed.
Need help?
Do you have a question about the Goods Cage and is the answer not in the manual?
Questions and answers