Advertisement
Advertisement
Table of Contents
Summary of Contents for Victor MG-320
- Page 1 MG 320 HIGH SPEED- UNIVERSAL TOOL...
- Page 3 Thank you for purchasing “виктор” (VICTOR) power tools This power tool, here in after referred to as a tool, is designed to process various small surfaces with interchangeable nozzles. The tool has a five-speed switch. Technical specifications виктор Model :...
- Page 4 Before turning on the power tool, remove the adjustment key from it. An adjustment key that is left attached to the rotating part of the power tool can cause serious injury. Before we put the tool down, turn off the machine and make sure that the moving parts have completely stopped.
- Page 5 If necessary, use only industrial cables designed for power not less than the power consumption of this tool. Figure No. 2 Care and storage Keep the unused tool out of the reach of children and don't let people unfamiliar with this instruction work with the tool. Timely sharpen the nozzles.
- Page 6 Remember that the service life and reliability of the tool increases with proper care and regular cleaning. Blow dirt and dust out of the tool body with dry compressed air as dirt accumulates in and around the ventilation holes. Clean with eye protection and a respirator.
Need help?
Do you have a question about the MG-320 and is the answer not in the manual?
Questions and answers