Summary of Contents for NKE Pad Pilot Series
-
Page 1: User Manual
Pad Pilot Part number: 90-60-545 Pad Pilot White 90-60-546 Pad Pilot Carbon USER MANUAL & INSTALLATION SHEET V1.1 Zi de Kerandré – Rue Gutenberg – 56700 – HENNEBONT www.nke-marine-electronics.fr... -
Page 2: Table Of Contents
Introduction ......................3 Operation ......................3 Description of the control keys ..............3 Settings of the Pad Pilot ..................5 Set up an address for the Pad Pilot ............... 5 Key sound ..................... 5 Use in a TOPLINE Bus ..................6 Selection of a display .................. -
Page 3: Introduction
1 INTRODUCTION The Pad Pilot controls displays and manages the autopilot. 2 OPERATION The Pad Pilot is given a node address, like a display. When the Pad Pilot is powered for the first time, the default address is 0 (factory setting). It will be necessary to define a node address for the Pad Pilot to be recognised and to operate on the Topline Bus. - Page 4 • RED LED Led indicating the current mode for the Pad Pilot (display selection mode, set- up mode) Flashes at each press. • PAGE Use this key to navigate in various displays of the Topline range. Press and hold to access the display selection mode. This key is also used to access the displays' menus, to scroll the pages and for the "back/return"...
-
Page 5: Settings Of The Pad Pilot
3 SETTINGS OF THE PAD PILOT 3.1 Set up an address for the Pad Pilot When the Pad Pilot is powered for the first time, the default address is 0, the LED flashes once per second, waiting for the operational node address. Press allocate an address. -
Page 6: Use In A Topline Bus
4 USE IN A TOPLINE BUS 4.1 Selection of a display To select a display with the Pad Pilot, press until the second beep (5 seconds). You’ve accessed the selection mode. Then press on the left or right arrow to toggle between displays. You may press several times until you find the desired display. -
Page 7: Autopilot On / Off
4.2 Autopilot ON / OFF To engage the autopilot, press To disengage the autopilot, press 4.3 Course to steer Pressing on any of the four keys alters the course to steer. A long press on (+10°) triggers an automatic tack. 67_Pad_Pilot_UM_UK_11... -
Page 8: Installation
5 INSTALLATION WARNING Turn the power supply Off before doing any work on the TOPLINE Bus. 5.1 Pad Pilot packing list - A Pad Pilot with a six metres cable. - A protection cover. - A Fixamo M14. - A plastic M14 nut. 5.2 Wiring the Pad Pilot Connect the bus cable to a Topline junction box as follow: White wire on "+12 V white"... -
Page 9: Mounting The Padpilot
5.3 Mounting the Padpilot There are several ways to mount the Pad Pilot: A 18 mm diameter hole is required to allow the cable running as well as the mounting kit. If the supporting surface is between 1 and 3mm: Screw the plastic nut by hand. If the supporting surface is between 3.1 and 40 mm: Screw by hand the Fixamo to the unit and then the plastic nut. -
Page 10: Specifications Of The Pad Pilot
DRILLING TEMPLATE 6 SPECIFICATIONS OF THE PAD PILOT Parameter Value With protection cover (mm): 122 x 62 x 27 (Length x Width x Depth) Dimensions Without protection cover (mm): 115 x 58 x 23 (Length x Width x Depth) - Hand-screw nut M14 (part Nr: 30-95-032) Mounting kit - Fixamo M14 (part Nr: 30-95-031) Weight... -
Page 11: Firmware Evolution For The Pad Pilot
7 FIRMWARE EVOLUTION FOR THE PAD PILOT Date Information V1.0 21/06/2018 Original version V1.1 08/11/2018 Bug correction for long auto shortcut. Possibility to acknowledge the TOPLINE Bus audible alarms. Compatibility with HR and Regatta processors. 67_Pad_Pilot_UM_UK_11...