National NOF HC Guest Seating Assembly Instruction

With the starter unit secure, an add-on or end unit (shown)
1
should be located so that the seat rails will slide into the
mating rail on the outside of the chair.
Note: seat panels and foam have been removed for clarity.
Figure A
Move the add-on unit into position so that the holes in the
2
seat rails are aligned with the slots in the mounting rails.
Assemble the rails using the (4) 1/4-20 X 5/8" button head
screws into the threaded holes. Ensure that the underside of
the screws is flush and tight to the face of the mounting
rails.
Figure B
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
Weli Assembly Instruc on
Figure C
Product Line
NOF HC Guest Seating
Recommend Tools
• 5/32" Hex Key or
drive
Package Contents Qty.
• 1/4-20 X 3/4" flat
head socket cap screw
• 1/4-20 X 5/8" button
head socket cap screw
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part # 3045797
Rev, -
Printed in U.S.A
© 2013 Kimball International, Inc.
.
800.482.1717
6
4