Cd Operation; Playing A Disc; Selecting A Different Track; Finding A Passage Within A Track - Philips MC-130/21M User Manual

CD Operation

STANDBY-ON PROGRAM TIMER
ON
OFF
PROGRAM
SOURCE
SELECT
PLAY•PAUSE STOP
PREV NEXT iR
IMPORTANT:
The lens of the CD player should never be
touched.
X

Playing a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
G CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN•CLOSE on the
top
of the system to open the CD
compartment.
➜ OPEN is displayed when
you
open the CD compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN•CLOSE to close the
CD door.
➜ READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
Press PLAY•PAUSE 2; (on the remote
4
control 2;) to start playback.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
12
CLOCK REPEAT SHUFFLE
BAND
To interrupt playback press PLAY•PAUSE 2;
5
(on the remote control 2;). Press
PLAY•PAUSE 2; (on the remote control 2;)
again to resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
To stop disc playback, press STOP 9.
6
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
– you select to standby.
– you press the tape deck PLAY 2 key.

Selecting a different track

G Press PREV ¡1 or NEXT 2™ (on the remote
control ¡ or ™) once or repeatedly until the
desired track number appears in the display.
G If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAY•PAUSE 2; (on the
remote control 2;) to start playback.

Finding a passage within a track

Press and hold down on PREV ¡1 or
1
NEXT 2™ (on the remote control à or á ).
➜ The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release PREV ¡1 or NEXT 2™ (on the
remote control à or á ).
➜ Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.