Advertisement
Advertisement
Table of Contents
Summary of Contents for Eirene Riser M1803
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. Introduction Page 3 2. User Precaution Page 3 3. Safety Guidelines Page 3 4. Installation & Assembly Page 6 5. Usage of Hand Control Page 7 6. Single Motor Riser Recliner Chairs (M1801 – M1802) Page 7 7. -
Page 3: Introduction
Introduction Thank you for purchasing one of our Eirene Riser Recliner chairs. Forte Rehab looks to ensure that all products designed for its range are constructed from high quality materials and with a high level of craftmanship. If for any reason, a defect or issue is found upon receiving your Riser Recliner, please contact your local agent or dealer so that we may look into the issue further. - Page 4 • Do not use the riser recliner chair in conjunction with any other therapeutic or beauty equipment such as massage mats, slimming machines or electric blankets. • Stop using the riser recliner chair if you encounter any pain or discomfort during the operation of the product.
- Page 5 • All repairs must be carried out by a qualified technician or After Sales Service. DO not attempt to repair anything yourself. • The manufacturer of this riser recliner chair, their agent, distributors, partners or dealers are not liable for any damages caused to person(s), animal(s), or property(s) resulting from improper or misuse of the riser recliner chair.
-
Page 6: Installation & Assembly
Installation & Assembly The riser recliner chair is packed in a semi knocked down form consisting of 2 main parts, the base section and the back. You shall also find the power supply adapter and user manual as well as the remote control (in the case of single motor units) in separate packaging within the box. -
Page 7: Usage Of Hand Control
Usage of Hand Control The hand control activates the motors in your riser recliner chair which allows you to sit, stand and recline. The hand controls for single and dual motor chairs differ in appearance and function. The controls for each model of riser recliner chair are illustrated below. -
Page 8: Single Motor Riser Recliner Chairs (M1803 - M1807)
If the leg rest section reaches a full 90-degree lift, the backrest shall start to recline. This may also be stopped at any desired angle by releasing “Button 2”. To get out of the chair By pressing “Button 1” you shall be able to reverse the functions mentioned above, therefore raising the backrest if reclined, lowering the leg rest if raised. - Page 9 To get into the chair While standing next to your riser recliner chair, press “Button 1” to raise the riser recliner chair to a height you can sit on comfortably with both feet firmly on the ground. This height will vary from person to person. When in position and ready, lean against the chair and press “Button 2”.
Need help?
Do you have a question about the Riser M1803 and is the answer not in the manual?
Questions and answers