Setting Up The Jack - Honda Civic 2020 Owner's Manual

HANDLING THE UNEXPECTED
10. Loosen each wheel nut about one
turn using the wheel nut wrench.
2.0 L engine models: Do not mount the compact spare on the front. If
mounted on the front, the compact spare, smaller in size than the full-size
tire, may damage the differential.
2.0 L engine models: If either front tire goes flat, remove the rear tire on the
same side, and mount the compact spare on the rear and the rear tire on the
front.
Do not use the jack if it doesn't work properly. Call your dealer or a
professional towing service.
The wheel nut wrench supplied with your vehicle is specially adapted to fit
the holder shaft. Do not use any other tool.
The subwoofer is located on the rear right side. Do not store anything in this
area. Doing so may compromise vehicle audio performance.
156 |

Setting Up the Jack

n
1. Place the jack under the jacking
point closest to the tire to be
changed.
2. Turn the end bracket clockwise (as
shown in the image) until the top of
the jack contacts the jacking point.
Make sure that the jacking point tab
is resting in the jack notch.
HANDLING THE UNEXPECTED
| 157