BHC Brulin Victory Use Directions

Victory Sprayer
Use Directions - Backpack
1

Charge Battery

This side is fully
illuminated when
charged.
(2 hour charge time)
Note: If wet, the battery will not work or charge.
Keep liquids from touching battery and charger
contacts. Wipe battery and charger contacts with
dry cloth immediately if they come into contact
2

Remove Cap/Tank

3

Fill Tank

BruTab 6S:
If using pre-diluted BruTab
6S solution, fill the tank with
disinfectant solution.
For Disinfectant Solution use
13.1g tablet as follows:
1. Fill tank with 2 gallons (256
oz) clean water.
2. For minimum 5382 ppm (4
minute TB) add 10 tablets.
3. For minimum 4306 ppm
(4 minute C. diff, 1 minute
Norovirus and Bloodborne
pathogens) add 8 tablets.
4. For a minimum 1076 ppm
(10 minute Hospital Use) add
2 tablets
For Sanitizer Solution use 3.3g
tablet as follows:
1. Fill tank with 2 gallons (256
oz) clean water.
2. For a minimum 100 ppm
(Food Sanitizer Claim), add 1
tablet.
Allow to completely dissolve
before using.
317.923.3211
BHC
WWW.BHCINC.COM
ISO 9001:2008 CERTIFIED
Tank is
removable
for filling
convenience.
Note: It is not
necessary to
remove tank for
filling.
Performex:
Performex
RTU:
Fill tank
with diluted
Fill tank with
solution from
solution from
the dispenser.
the bottle.
Performex
Performex RTU
Product No. 161052-33
Product No. 161051-Q6
13.1g
BruTab 6S
3.3g
Product No.
13.1g is 161021-8N
3.3g is 161021-8G
4

Replace Cap/Tank

5

Adjust Nozzle

Medium
6

Spray

Turn on the unit and squeeze the
trigger. Optimum sprayer distance is 2
feet (24 inches).
7

Clean Up

CLEANPOINT
point by point training
Rotate the nozzle
to select the
medium (80
Large
micron) or large
(110 micron)
setting.
BHC recommends
Small
80 and 110
micron nozzles
for use with our
disinfectants.
Remove tank.
Refer to product label for proper
disposal of unused solution.
Rinse tank with water.
For preventative maintenance:
Rinse nozzle with hot water after
every couple of uses.
(Instructions for nozzle removal
and wrench included with unit)