AINA PTT Voice Responder Quick Manual

Pairing your PTT Voice Responder with your
iPhone via Bluetooth
1. Turn on your PTT Voice Responder by holding down the
Power button for more than 3 seconds. After it is on, a
blinking green light will indicate that the device is ready
for pairing.
2. Turn on your iPhone's Bluetooth by going to: Settings —>
Bluetooth —> Turn on.
3. Pair your PTT Voice Responder to your iPhone by se-
lecting it from the Devices list. To know which device to
select from the list, check the unique MAC-address on
the back of your Voice Responder. Once it has successful-
ly paired, a blue light will begin blinking on your device.
1.
NOTE: The Voice Responder can only be paired with one
device at a time. If you want to pair it to another device,
you need to perform a Software reset by pressing and hold-
ing both soft buttons and both PTT buttons simultaneously,
until the LED blinks once in yellow (buttons explained at the
back of this guide).

QUICK GUIDE

Installing the Zello application into your iPhone
4. From your iPhone, go to the iTunes App Store, search for
the application called Zello Walkie Talkie and install it.
5. Open the application and create a new account with
Zello (5a/ 5b).
4.
2.
3.
5b.
Connecting your AINA PTT Voice
Responder to Zello
Enabling your PTT Voice Responder within Zello
6. In the Zello application, select the three horizontal lines
displayed on the top left corner, and from the list select
Options.
7. Select 'Push to talk button'.
8. Select 'Wireless Zello button'.
9. Turn this function on and select your device from the list.
5a.
6.
8.
7.
9.