Pairing A Bluetooth Device - ION Pathfinder Quick Start Manual

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on Pathfinder Charger. * If you have previously connected to another Bluetooth
device, Pathfinder Charger will reconnect. To disconnect pairing if the Bluetooth icon is lit
solid, press and release the Bluetooth button.
3. Press and release the Bluetooth button to pair to a Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find Pathfinder Charger and connect. *
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
5. To disconnect pairing while the Bluetooth icon is lit solid, press the Bluetooth button. *
6. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
* Tip: Press the Bluetooth button twice to enable or disable voice prompts.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Pathfinder Charger:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one time step).
3. Power on Pathfinder Charger.
4. Press and release the Bluetooth button on Pathfinder Charger and the Bluetooth icon will
flash (only needed for the first time when NFC pairing with the device).
5. Touch and briefly hold your device to the NFC logo located on Pathfinder Charger's top
panel.
6. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
7. To unpair, gently bump your device against the NFC logo or disconnect the Bluetooth
connection from your device's Bluetooth menu.
Stereo Linking Two Speakers
To link two Pathfinder Charger's together for stereo sound:
1. Press and hold the Play/Pause/Link button to enter Stereo Link mode. Once a link has
been established, the word LINK should appear in the display.
2. Select which unit will be the master (left channel) by pressing and releasing the Bluetooth
button.
3. To disconnect the link between the two speakers, double-press the Play/Pause/Link
button.
7