Advertisement
1
2
3
4
5
4.
Apply a small dab of Dazzle
Drops cleaner to brush tip.
4
Power switch
on/o
Place brush tip on jewelry, prior to turning the unit ON.
Press the ON/OFF button to activate the motor and start
cleaning.
There is no need to press down hard, allow the bristles to
rotate freely to clean the jewelry.
For best results, rotate the Dazzle Stik around the jewelry to
get into all the crevices.
When cleaning is complete, press the ON/OFF button again to
turn o the motor.
Gently rinse the jewelry in cool water.
3.
1
Lift outer cover to remove.
5.
2
Gently rinse the brush head in cool water.
Take care to avoid getting the handle wet.
Allow the bristle to dry.
Replace the cover and store the Dazzle Stik
in a clean dry spot.
3
5.
5
Gently rinse the brush head in cool water.
Take care to avoid getting the handle wet.
Allow the bristle to dry.
Replace the cover and store the Dazzle Stik
in a clean dry spot.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Connoisseurs Sonic Dazzle Stik
Summary of Contents for Connoisseurs Sonic Dazzle Stik
- Page 1 Lift outer cover to remove. Gently rinse the brush head in cool water. Take care to avoid getting the handle wet. Allow the bristle to dry. Replace the cover and store the Dazzle Stik in a clean dry spot. Apply a small dab of Dazzle Drops cleaner to brush tip.
- Page 2 Remove battery door: Place ngers on at surfaces in housing. Gently push down on battery door to remove. To replace the bristle head: Align the angled surfaces on the back side of the bristle head to the angled surfaces on the center pin of the housing.
Need help?
Do you have a question about the Sonic Dazzle Stik and is the answer not in the manual?
Questions and answers