PEUGEOT 2008 Handbook page 53

These applications can be managed using the
steering mounted controls or the audio system
controls.
When the USB port is used, the portable
device charges automatically.
A message is displayed if the power drawn
by the portable device exceeds the current
supplied by the vehicle.
For more information on how to use this
equipment, refer to the Audio equipment
and telematics section .
12 V accessory socket
► Plug in a 12 V accessory (with a maximum
rated power of 120 W) using a suitable adapter.
Observe the maximum power rating to
avoid damaging the accessory..
The connection of an electrical device
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio reception or
interference with displays in the screens.
FOCAL Premium Hi-Fi
®
system
The vehicle is equipped with a high-fidelity
acoustic system from the French brand FOCAL
10 speakers incorporating exclusive FOCAL
technologies offer the pleasure of pure and
detailed sound inside the vehicle:
– Central speaker/satellite speakers: Polyglass
technology delivering sound immersion and
spatialisation.
– High fidelity woofer/mid-range speakers:
Polyglass technology delivering balance and
precise sound.
– TNF tweeters: Inverted dome aluminium
technology giving optimum sound dispersion and
very detailed higher frequencies.
– 12-way active amplification - 515 Watts:
Hybrid Class AB/Class D technology providing
breadth and finesse in the high frequency
signals, as well as real power in the bass.
– Subwoofer: 200 mm triple coil Power Flower
technology for defined and dynamic reproduction
of lower frequencies.
For optimum sound reproduction, it is
recommended that you put the boot floor
in the high position (depending on version).
Ease of use and comfort
Wireless smartphone
charger
.
®
®
It allows wireless charging of a portable device
such as a smartphone, using the magnetic
induction principle, in accordance with the Qi 1.1
standard.
The portable device to be charged must be
compatible with the Qi standard, either by design
or by using a compatible holder or shell.
The charging area is identified by the Qi symbol.
The charger works with the engine running and
with the Stop & Start system in STOP mode.
Charging is managed by the smartphone.
With Keyless Entry and Starting, the charger's
operation may be briefly disrupted when a door
TM
is opened or the ignition is switched off.
Charging
► Open the flap to access the charging area.
► With the charging area clear, place a device
in its centre.
The system is not designed to charge
multiple devices simultaneously.
3
51