Advertisement
1. INSTALLATION PROCEDURE
W
ARNING
outlet.
1.1
Removing the actual module or dummy
How to remove
1. Turn out the fixing screw holding the actual installed module or the dummy cover. (image 1-1)
2. Slide out the actual installed module or take away the dummy cover.
Image 1-1
Removing the dummy plate or module
1.2
Inserting a new module
How to insert
1. Slide the module into the slot. Insure the module is seated correctly in the guide grooves.
2. Press on the handle of the input module until the module plug seats in the connector of the Solaris LC40.
3. Secure the input module by turning in the removed screw.
4. Reconnect to the wall outlet and start up the Solaris LC40.
R5976706 VIDEO/S-VIDEO/COMPONENT/RGB INPUT 06/04/2004
:
Before starting the installation procedure, switch off the Solaris LC40 and unplug from the wall
1 screw
1. Installation procedure
1
Advertisement
