Install
Mounting stand onto the set
1
Put MCM275 on a flat and firm surface, rear side facing up
2
As shown, align the stand to the slots at set's bottom, 4 FRONT facing
down
3
Push the stand down into the slots
Helpful hints:
- For wall mounting, please refer to the User Manual, Appendix: How to mount
your MCM275 onto Walls. You may need assistance from the qualified service
personnel.
Rear connections
Speaker
(right)
1
Connect the cable of the left speaker to LEFT (red and black) and the cable
of the right speaker to RIGHT (red and black)
2
Extend the wire antenna and fit it to FM ANTENNA
3
a. Assemble the loop antenna
b. Fit the plug of the loop antenna to AM ANTENNA
4
a. If your system is equipped with a Voltage Selector, set the VOLTAGE
SELECTOR to the local power line voltage
b. Connect the AC power cord to the wall socket
FM wire
antenna
AC power cord
MW loop
antenna
Speaker
(left)
AM
ANTENNA
AC power cord