Advertisement
4) Connect the lead wire of battery to connector of controller with firm
pressure.
When connecting the battery harness , be sure to snap connectors
5)
Securely and zip the excess wires to frame.
6) Align the seat with the four Screw holes as shown below and
mount using 4 - M6×30 (1/4"×1-1/5") bolts, use Allen wrench
provided. Bolts to be connect from the bottom of the Go Kart.
DO NOT RETURN STORE. For questions regarding assembly and use,
call Customer Service: 877-441-6999.
Bolt 1
Bolt 3
Bolt 2
Bolt 4
Advertisement
