Advertisement
Quick Links
R
IceManCooler
USER GUIDE
ICE-D50
D5
Single D5 Reservoirs
：
CAUTION:
This reservoir requires two 5.25" drive bay in your computer
chassis,Please make sure you have enough to install.
：
WARNING:
Do not use alcohol or alcoholic liquids on this reservoir!
Do not place upside down or sideways!
Icemancooler
This product is intended for experienced users only. Please consult with a qualified
technician prior to installation. Improper installation may cause damage to your
equipment. Icemancooler assumes no liability whatsoever, expressed or implied,
for the use of these products, nor their installation. The following instructions are
subject to change without notice. Please visit our web for up to date information.
2017.8 V1.0
5.25
www.icemancooler.com
High Performance Liquid Cooling
:
x1
G1 4
x4
(61.5x2.65) x2
(M4x10)
x4
(M3x6) x10
！
Dimension (
)
Front
148 mm
Back
33.5 mm
Included:
DUAL slot D5 reservoirs x1
G1/4 stop plug x4
O-ring(61.5x2.65) x2
Pump Holder
Pump screws(M4x10) x4
Reservoirs screws(M3x6) x10
Pumps &other fittings Not included!
Right
Volume
V=288ml
66 mm
Top
Advertisement
Summary of Contents for IceManCooler ICE-D50
- Page 1 This product is intended for experienced users only. Please consult with a qualified technician prior to installation. Improper installation may cause damage to your equipment. Icemancooler assumes no liability whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are 33.5 mm...
- Page 2 Connection Mode Installing The Pump STEP 1: STEP 2: (Default): 。 (61.5x2.65) ， (M4x10) Attach provided o-ring (61.5x2.65) to pump. Insert pump into reservoir, then fasten screws(M4x10) in cross pattern. M4x8 Screw M4x8 (O-ring) Pump (Ring) (O-ring) Reservoirs Installing The Reservoirs ( Mode 2 STEP 1: STEP 2:...