Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for KanexPro WP-CONTROLS
- Page 1 PDF provided by Conference Room AV KanexPro WP-CONTROLS Wall Plate Control Panel for IR, RS-232 & RS-485 - Silver...
- Page 2 Programmable Control Panel Wall Plate All Rights Reserved Version: Programmable Control Panel 2013V1.2...
- Page 3 Programmable Control Panel NOTICE: Please read this user manual carefully before using this product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till May 2013. Any changes of functions and parameters since then will be informed separately.
-
Page 4: Table Of Contents
Programmable Control Panel Table of Contents 1. Introduction ......................... 1 1.1 Introduction to the Programmable Control Panel ..........1 1.2 Package Contents ....................1 2. Features ........................1 3. Specification ........................ 2 4. Connection Introduction ....................2 ... -
Page 5: Introduction
Also, RS232 (2) and IR3 share the same port, and cannot be used at the same time. Control KanexPro products such as switchers, scalers and extender, as well as third party devices such as projectors, screens and much more. It is an easy-to-use control device for conference and boardrooms, classrooms and lecture halls. -
Page 6: Specification
Programmable Control Panel 3. Specification Specification 3 x RS232, 1 x RS485, 3 Program Port USB or RS232 Output Port x Infrared, 2 x Relay Serial Control Baud Rate 9600 baud, 8 data bits, 1 RS232 Port And Protocol stop bit, no parity Software PS-WP Temperature... -
Page 7: Connection Of Programming And Looping
Programmable Control Panel Other part is RS232 (3), it can be used for control other devices or looping output, or connect with PC. These two parts share the same grounding. ② This port includes: RS232 (1)/IR2, IR1 and RS485. a) RS232 (1)/IR2: share the same port; the detailed use depends on the setting of PS-WP. - Page 8 Programmable Control Panel Several pieces programmable control panels can be also looped to be a system, for control more devices. It is looped by the inter RS232 setting. Please check the demo picture as below: Several programmable control panels Looping connecting After connect the programmable control panels as above, and then we should set the ID of each programmable control panel by PS-WP.
-
Page 9: System Operations
Programmable Control Panel 5. System Operations 5.1 Front Panel Introduction Crystal and luminescent, programmable buttons: Every button can be programmable with the software PS-WP. Connect the PC via USB or RS232. And every label inside the button can be changeable. You can choose the label you need and change it very easily like below: (For the specific transparent paper table, please contact the local distributor or reseller for it) -
Page 10: Main Menu
Programmable Control Panel After connect the programmable control panel with PC by USB or RS232, we can open the PS-WP to program the buttons for controlling. The main window of PS-WP has five parts: main menu, panel (button) setting, event setting, action list and event list. - Page 11 Programmable Control Panel NOTE: When select the model, it will pop up “Output Port Selection” dialog, user can select different RS and IR types, depend on the uses of the two-shared ports. The dialog is as the picture below: The output port set in PS-WP and the port used in the programmable control panel is corresponding.
-
Page 12: Panel/Key Setting
Programmable Control Panel 3) Connection type: the instructions are in the picture below: 1：Com, connect by serial port. 2：USB, connect by mini USB. 3：Disconnect, disconnect the connection. 4：Upload: upload the programmed data to the programmable control panel. It will clear all the old data in the programmable control panel. - Page 13 Programmable Control Panel Key Action Type： 1. Press: Execute events when press button. 2. Release: Execute events when release button. 3. Page: Built-in most 4 actions, actions need to be switched by other buttons, press to execute. 4. Toggle: Built-in most 4 actions, actions will loop run when press.
-
Page 14: Action List
Programmable Control Panel 3. Yellow Keys: Keys 33-36, all are virtual keys. Key 33 and 34 are for I/O control, which is not supported with the programmable control panel. Key 36 is a start action, if add events to this action, when the programmable control panel is power on, it will execute the events in this action. -
Page 15: Event Setting
Programmable Control Panel 5.3.4 Event setting Event setting includes RS232, IR, I/O, Relay, Delay, and Compare, LED, Page, Loop and Toggle setting. Before set events, an action must be added first. The following introduction will show you the setting of each event: Ø... - Page 16 Programmable Control Panel 2) There are two send types: send once and send more times. When select “more times”, the send times and the delay between times can be set. See in picture below: 3) The send port must be selected as the same as model setting, otherwise the event cannot be added.
- Page 17 Programmable Control Panel 1) The data of IR need to be selected from library. Click “Change Lib” to select a library file and open it. Click “Edit Lib” to create or edit a library file as below: Create/open a library Create/delete/rename the function name of the IR data Select a function, and then click “learn”, press the IR remote button to send...
- Page 18 Programmable Control Panel 3) The send port must be selected as the same as model setting, otherwise the event cannot be added. 4) The IR can set the carrier on/off, to turn on/turn off the IR sending. Ø I/O Setting There is no I/O port in the programmable control panel, so the setting is not introduced in this manual.
- Page 19 Programmable Control Panel Ø Compare Setting This item is used for compare the feedback of RS232 commands. When the programmable control panel sends a RS232 command to the controlled device, the device will send back a feedback. If we add the correct feedback in the data, the programmable control panel will compare it with the feedback received from controlled device, to verify the command is work or not.
- Page 20 Programmable Control Panel Ø LED setting This item is used for set the button LEDs in the programmable control panel to turn on/off. The setting is as below: Ø Page setting White buttons can be set to type “page” that include four actions. To change different actions, it will need other white buttons to active the page action number.
- Page 21 Programmable Control Panel In event setting, we add four different events to the four page actions of key1, and the four other keys will be added the page event to each of them as below: Then set the “page” event to make four “press” actions to active the four page number: key5-num1, key6-num2, key7-num3 and key8-num4.
- Page 22 Programmable Control Panel Ø Loop Setting This item is used for looping the programmable control panel. When use the loop function, the ID of each programmable control panel must be set. Ø Toggle Setting The toggle setting is as the picture below: The setting steps of toggle are similar with the page setting.
-
Page 23: Event List
Programmable Control Panel b) When press the button6 and then button1, the button1 will execute the event of num2, press button1 more times it will execute num3, then num4->num1->num2 and so on. c) When press the button7 and then button1, the button1 will execute the event of num3, press button1 more times it will execute num4, then num1->num2->num3 and so on. -
Page 24: System Diagram
HDMI/IR/RS232 Twisted Pair POC Extender 6. System Diagram The programmable control panels can active different ports at one time. It means every button can send the RS232 and RS485 commands, IR code and control the relay at the same time. The demo system diagram as below: 7. -
Page 25: Safety Operation Guide
Programmable Control Panel 8. Safety Operation Guide In order to guarantee the reliable operation of the equipments and safety of the staff, please abide by the following proceeding in installation, using and maintenance: 1) The system must be earthed properly. Do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz. - Page 26 Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of customers’ receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication.
- Page 27 Programmable Control Panel Brea, California KanexPro.com MPN: WP-CONTROLS KanexPro is a trademark of Apogee Inc., registered trademarks in the U.S...
- Page 28 Programmable Control Panel...
Need help?
Do you have a question about the WP-CONTROLS and is the answer not in the manual?
Questions and answers