Different Play Modes: Shuffle And Repeat; Programming Track Numbers; Reviewing The Programme; Erasing The Programme - Philips MC147/61 User Manual

CD Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes cannot be combined with
PROGRAMME.
SHUF ................ tracks of the entire disc are
played in random order.
REP ALL ........... repeats the entire disc/
programme.
REP ................... plays the current track
continuously.
1
To select Repeat play mode, press REPEAT on
the main unit or REP ALL on the remote
control.
●
To select Shuffle play mode, press SHUF on the
remote control.
2
Press 2; to start playback if in the STOP
position.
3
To return to normal playback, press the
respective REPEAT (on the main unit), REP
ALL or SHUF (on the remote control) button
until the various SHUFFLE/ REPEAT modes are
no longer displayed.
● Press 9 once during playback to stop repeat/
shuffle playback.
● Press 9 again to cancel repeat/shuffle play mode.
Note:
– The SHUFFLE and REPEAT functions can be used
simultaneously.

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
In the stop position, use the TUNING 4
¢ (on the remote control ¡ / ™) to select
your desired track number.
2
Press PROG to store.
➜ flashes, and 01 is displayed
Display:
PROG
briefly, then the selected track number.
3
Repeat steps 1-2 to select and store all desired
tracks.
12
4
To start playback of your disc programme, press
2;.

Reviewing the programme

●
Stop playback and press PROG.

Erasing the programme

You can erase the programme by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
●
opening the CD compartment;
➜
disappears from the display.
PROG