ACT Meters GOLD-IBT Quick Start Manual

Farnell InOne order code
7820097
Produced in the UK by:-
Address: ACT Meters Ltd
The Old Smithy
Church Road
Rainford
Merseyside
Post Code: WA11 8HD
Country: United Kingdom
Phone: +44(0)1744 886660
Fax: +44(0)1744 886661
USA Freecall: 1-877-712-2278
Email: ibtinfo@actmeters.com
Web: www.actmeters.com
For future service and re-calibration return to ACT
Meters Ltd (call above for cost).
Unique GOLD-IBT features!
Simulates full battery discharge test in seconds.
Tests 12Volt SLA and Car batteries from 1.2Ah - 200Ah.
Automatically displays Ambient Temperature,
DC Voltage and Ampere-hour Capacity available.
Powered by battery under test with polarity protection.
Warns if battery voltage is too high or low.
Table indicates when batteries need to be recharged or
replaced.
Quick, accurate and easy to use.
Applications include: Fire and Burglar Alarm Systems, Motor
Vehicles, Boats, UPS Systems, Telecommunications,
Emergency Lighting, Portable Tools, Lawnmowers, Mobility
Vehicles, Medical Equipment, Solar Power, Robotics etc.
For full product range, testimonials and worldwide
distributors visit:-
w w w . a c t m e t e r s . c o m
A w a r d - W i n n i n g
I N T E L L I G E N T
BATTERY TESTER
In recognition of new product
development and innovation...
Simulates full battery discharge
test in seconds!
New GOLD-IBT
Tests 12Volt SLA and Car batteries from 1.2Ah - 200Ah.
Automatically displays Ambient Temperature, DC Voltage
and Ampere hour (Ah) Capacity available in the battery.
Thank you for purchasing this unique Award-winning
Intelligent Battery Tester. Before use, please read the
operating instructions and battery testing tips carefully.
The problem Battery manufacturers recommend to recharge
or replace the battery when the rated Amp/hr (Ah) capacity
falls below 65% - but multimeters are only capable of
measuring terminal voltage!
The solution The new GOLD-IBT Intelligent Battery Tester
from ACT Meters is designed to simulate a full battery
discharge test in seconds! Digitally programmed to test
12Volt SLA and car batteries from 1.2Ah - 200Ah, this unique
Award-winning product automatically displays Ambient
Temperature, DC Voltage and Ampere-hour Capacity
available in the battery. It's quick, accurate and easy to use
and identifies batteries that need to be recharged or replaced
according to prevailing conditions - irrespective of how long
they have been in use.
How it works The Intelligent Battery Tester is not a load
tester, nor does it measure resistance or conductance. Instead
it works by applying a pulsed frequency to the battery under
test. The patented neutral net software analyses the
chemistry of the battery during this process and provides a
direct reading in Amps/Hr. The design took many months to
complete and accuracy was assured by performing a full
discharge test on 100s of batteries and comparing results.
Testimonials as to its benefits, reliability and performance can
be viewed by visiting www.actmeters.com.
For excellence and innovation
in the Security Industry...