Sunsky BD-300 Manual

Motion detection universal adapter camera

BD-300 Motion Detection Universal adapter Camera

Manual

I. Introduction

Thanks for choosing our product. This operation manual is designed to guide you in operating the product, as well as

application programs attached with the product. Before using the product and corresponding accessorial applications,

please read carefully this manual, so as to ensure that you may correctly and easily handle the product.

Video Resolution: 720× 480, 30 FPS;

●

Video Format: AVI;

●

USB Transmission Speed: 2.0;

●

Support motion detection, video and voice recording;

●

Web Camera Function: The product can be used as a standard PC camera, while the accessory driver program needs

●

to be installed.

1. Stop Recording

2. SD Card Slot

3. USB Connection Port

4. Camera

1. Starting Recording while Powering On: Plug the product with 220V electric supply, it will automatically start up

and begin to record videos with the light green light always on.

2. Video Storage: Under the recording state, short press the stop Recording button, the red light will glitter three

times and then go off, indicating that the video has been saved. Then, switch off the power.

3. Motion Detection: The product will start recording once being powered on, and the recorded videos will be

automatically saved once every 20 minutes. If there is no mobile object in front of the camera, it will stop recording,

while if there is object appearing, it will start a new recording.

Shenzhen SUNSKY Technology Limited

Table of Contents

Do you have a question about the BD-300 and is the answer not in the manual?

Page 1 Shenzhen SUNSKY Technology Limited BD-300 Motion Detection Universal adapter Camera Manual I. Introduction Thanks for choosing our product. This operation manual is designed to guide you in operating the product, as well as application programs attached with the product. Before using the product and corresponding accessorial applications, please read carefully this manual, so as to ensure that you may correctly and easily handle the product.
Page 2 Shenzhen SUNSKY Technology Limited 4. Plug the product onto an USB port, it will immediately be recognized to be a mass storage device. Open the device to view all recorded videos. 5. If there is no enough disk space, the new recorded video will overwrite the previous one.