Connections; Step 1: Placing Speakers - Philips MCD297/12 User Manual

FM antenna
Speaker
(right)
IMPORTANT!
– The type plate is located at the rear of
the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all other
connections have been made.
– Never make or change any
connections with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a
safety circuit has been built in. Therefore,
your system may switch to Standby
mode automatically under extreme
conditions. If this happens, let the system
cool down before reusing it (not available
for all versions).
MW antenna
LINE OUT
R L
FM aerial
75 Ω
VIDEO S-VIDEO
MW aerial
VIDEO OUT
R L
+
–
SPEAKER 4Ω

Step 1: Placing speakers

Place the front left and right speakers at equal
distances from the TV set and at an angle of
approximately 45 degrees from the listening
position.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD
System.

Connections

Speaker
(left)
AC power cord
Front Front
speaker speaker
( left ) ( right )
VIEWING AREA
13