Appendix; How To Mount Your Mcm277 Onto Walls; What's In The Supplied Mounting Kits; What Else You'll Need - Philips MCM277/12 User Manual

How to mount your MCM277
onto walls
IMPORTANT!
– The wall mounting instructions are for
the use of the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto walls.

What's in the supplied mounting kits

140 mm (5.51")

What else you'll need

– Drilling tools (e.g. electric drill)

Preparation

1
To find a suitable location for mounting, try
your necessary rear connections (see
the chapter Installation).
2
Ask a qualified person to help you with the
wall mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your walls;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
P001-P029_MCM277_22_Eng

Mounting your MCM277

1
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown)
2
Drill two 6mm diameter holes as marked
3
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
1 x template
the wall
(Wall mounting
instructions)
2 x screws
4
To detach the stand,
a. As shown, hold down the 3 PRESS buttons
b. Move out the stand to detach
5
Hang the unit on the fastening screws
6
As shown, hook and mount the speakers in
place
29

Appendix

140 mm (5.51")
PRESS PRESS
2007.12.27, 16:32
29