1. Manuals
  2. Brands
  3. Cumberland Manuals
  4. Timer
  5. FT8SA
  6. User manual

Cumberland FT8SA User Manual

24 hour timer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FT8SA
24 HOUR TIMER
M 890-00090
rev. 01
REV. 00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FT8SA and is the answer not in the manual?

Questions and answers

Summary of Contents for Cumberland FT8SA

  • Page 1 FT8SA 24 HOUR TIMER M 890-00090 rev. 01 REV. 00...

  • Page 2: Mounting Instructions

    1. INTRODUCTION The FT8SA is a 24-hour timer designed for cage layer buildings with up to 6 feeder outputs, 1 filling output and 1 independent clock output. Up to 24 starts and 24 stimu- lations can be programmed per day.
  • Page 3 NO terminal. ALL WIRING MUST BE DONE BY AN AUTHORIZED ELECTRICIAN AND MUST COMPLY WITH APPLICABLE CODES, LAWS AND REGULATIONS. BE SURE POWER IS OFF BEFORE DOING ANY WIRING TO AVOID ELECTRI- CAL SHOCKS AND EQUIPMENT DAMAGE. WARNING FT8SA.rev.01...

  • Page 4: Location Of The Controls

    Flashing Display: As a rule, a flashing display means the value displayed can be adjusted. )76$  +285 7,0(5 6(&21' )81&7,216 )81&7,216 6(77,1*6 INTERNAL SWITCHES ON INSIDE TOP COVER FT8SA.rev.01...

  • Page 5: Setting The Clock

    1 2 3 4 5 6 Filling 1 2 3 4 5 1 2 3 4 5 Inter Start Delay 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Running Time FT8SA.rev.01...
  • Page 6 • Use the adjustment buttons to set the on-off state to the desired value. • Press the push-button. The hours value of the start time flashes. • Use the adjustment buttons to set the hours. • Press the push-button. The minutes value of the start time flashes. FT8SA.rev.01...
  • Page 7 Adjusting the Stimulation Start Times • Set the function to STIMULATION – START TIME using the selector buttons. The word “STi” flashes, alternating with the stimulation number. • Use the adjustment buttons to set the stimulation number to the desired value. FT8SA.rev.01...

  • Page 8: Auxiliary Output

    Press the push-button. The start time minutes value flashes on the display. • Use the adjustment buttons to set the start time minutes value to the desired va- lue. • Press the push-button. The stop time hours value flashes on the display. FT8SA.rev.01...

  • Page 9: Manual Mode

    To Manually Stop Auxiliary Output • Set the function to AUXILIARY - MANUAL using the selector buttons. Use the adjustment buttons to stop a feeding cycle After a five-second delay, the auxiliary output is deactivated and the word “ STOP ” is displayed. FT8SA.rev.01...

  • Page 10: Alarm Conditions

    None of the other functions will operate if this happens. When power is restored, the FT8SA will resume activation of cycles and stimulations according to the current clock time and/or elapsed running time.
  • Page 11 NOTES...
  • Page 12 NOTES...

Table of Contents